Mazda MPS 2.3 MZR 16v Turbo 260 hp — Stage 1 file (+45 hp)
hp
Stage 1 file for Mazda MPS 2.3 MZR 16v Turbo 260 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mazda MPS 2.3 MZR 16v Turbo 260 hp ECU
Mazda MPS (2006) 2.3 MZR 16v Turbo 260 hp — mass-market petrol engine of the passenger segment of the Mazda Motor Corporation (независимый) group (Япония, 1920). Stage 1 chip tuning raises power from 260 to 305 hp (+45 hp, +17%) and torque from 380 to 450 Nm (+70 Nm). The 2006 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Mazda is a Japanese carmaker, founded in 1920 in Hiroshima. Mazda is an independent brand (historically with a technical partnership with Ford). SkyActiv is Mazda's signature engine philosophy built around a high compression ratio. SkyActiv-G is Mazda's signature naturally aspirated petrol range with a high compression ratio. High-output Mazdas are rare in the current line-up. Mazda's factory optimisation is close to the limit, leaving only modest headroom for Stage 1.
Mazda has a limited chip tuning culture owing to its already optimised factory calibration. The SkyActiv technology is already close to its factory limit, leaving little headroom for Stage 1 without hardware changes. High-output Mazdas are rare in the current line-up.
Frequently asked questions
How much horsepower does Stage 1 add for the Mazda MPS 2.3 MZR 16v Turbo 260 hp?
After Stage 1 the power of the Mazda MPS 2.3 MZR 16v Turbo 260 hp rises from 260 to 305 hp, a gain of 45 hp (+17%). Torque rises from 380 to 450 Nm (+70 Nm).
How does Stage 1 differ from stock on the Mazda MPS?
Stage 1 is a software optimization of the factory ECU firmware of the Mazda MPS with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +45 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Mazda MPS?
The high-output Mazda MPS 2.3 MZR 16v Turbo 260 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Mazda MPS 2.3 MZR 16v Turbo 260 hp?
Stage 2 on the Mazda MPS 2.3 MZR 16v Turbo 260 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Mazda MPS remain valid after Stage 1?
After remapping the Mazda MPS, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mazda MPS?
Reading and writing via OBD takes 25-30 minutes on the Mazda MPS. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mazda MPS?
Before Stage 1 the original of the Mazda MPS 2.3 MZR 16v Turbo 260 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mazda MPS 2.3 MZR 16v Turbo 260 hp cost?
The remap price for the Mazda MPS 2.3 MZR 16v Turbo 260 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.