Mazda Mazda 6 1.8 Skyactiv-D 115 hp — Stage 1 file (+34 hp)
hp
Stage 1 file for Mazda Mazda 6 1.8 Skyactiv-D 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mazda Mazda 6 1.8 Skyactiv-D 115 hp ECU
Mazda Mazda 6 (2018) 1.8 Skyactiv-D 115 hp — mass-market diesel engine of the passenger segment of the Mazda Motor Corporation (независимый) group (Япония, 1920). Stage 1 chip tuning raises power from 115 to 149 hp (+34 hp, +30%) and torque from 270 to 340 Nm (+70 Nm). A 2018 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
Mazda is an independent brand (historically with a technical partnership with Ford). SkyActiv is Mazda's signature engine philosophy built around a high compression ratio. Mazda specialises in family saloons and compact crossovers. SkyActiv-D is Mazda's signature diesel range with a uniquely low compression ratio. SkyActiv-D is positioned as the cleanest diesel in the mainstream segment. On modern Mazda diesels, Bench is often needed.
Mazda has a limited chip tuning culture owing to its already optimised factory calibration. The SkyActiv technology is already close to its factory limit, leaving little headroom for Stage 1 without hardware changes. On SkyActiv-D, Stage 1 delivers a modest gain (5-12%). There is little headroom for Stage 1 without hardware changes. Mid-range Mazda — SkyActiv engines with a conservative factory calibration.
Frequently asked questions
How much horsepower does Stage 1 add for the Mazda Mazda 6 1.8 Skyactiv-D 115 hp?
Stage 1 for the Mazda Mazda 6 1.8 Skyactiv-D 115 hp adds +34 hp — power increases from 115 to 149 hp (+30%). Torque rises from 270 to 340 Nm (+70 Nm).
What does a Stage 1 remap of the Mazda Mazda 6 1.8 Skyactiv-D 115 hp include?
Stage 1 chip tuning of the Mazda Mazda 6 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +34 hp with no hardware changes.
Can you do Stage 1 on the Mazda Mazda 6 1.8 Skyactiv-D 115 hp?
Yes, Stage 1 for the Mazda Mazda 6 1.8 Skyactiv-D 115 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Mazda Mazda 6?
Stage 2 for the Mazda Mazda 6 1.8 Skyactiv-D 115 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the Mazda Mazda 6 warranty after chip tuning?
The factory warranty of the Mazda Mazda 6 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Mazda Mazda 6 take?
On the Mazda Mazda 6 1.8 Skyactiv-D 115 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Mazda Mazda 6?
Yes, the original ECU firmware of the Mazda Mazda 6 1.8 Skyactiv-D 115 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Mazda Mazda 6?
Stage 1 for the Mazda Mazda 6 1.8 Skyactiv-D 115 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.