Mazda Mazda 3 1.5 Skyactiv-G M-Hybrid 118 hp — Stage 1 file
hp
Stage 1 file for Mazda Mazda 3 1.5 Skyactiv-G M-Hybrid 118 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mazda Mazda 3 1.5 Skyactiv-G M-Hybrid 118 hp ECU
Mazda Mazda 3 (2020) 1.5 Skyactiv-G M-Hybrid 118 hp — mass-market hybrid engine of the passenger segment of the Mazda Motor Corporation (независимый) group (Япония, 1920).
The RX (Wankel) is Mazda's historic rotary engine series. Mazda is a Japanese carmaker, founded in 1920 in Hiroshima. Mazda is an independent brand (historically with a technical partnership with Ford). The Mazda MX-30 is a compact electric car with a distinctive architecture. MHEV 24V is Mazda's mild-hybrid system on its current models. The Mazda CX-60 PHEV is the flagship PHEV crossover.
The SkyActiv technology is already close to its factory limit, leaving little headroom for Stage 1 without hardware changes. Mazda has a limited chip tuning culture owing to its already optimised factory calibration. There is little headroom for Stage 1 without hardware changes. Mid-range Mazda — SkyActiv engines with a conservative factory calibration.
Frequently asked questions
What changes in the Mazda Mazda 3 ECU after Stage 1?
Stage 1 on the Mazda Mazda 3 1.5 Skyactiv-G M-Hybrid 118 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved.
Is a Stage 1 remap safe for the 1.5 Skyactiv-G M-Hybrid 118 hp?
Stage 1 on the Mazda Mazda 3 1.5 Skyactiv-G M-Hybrid 118 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Mazda Mazda 3 1.5 Skyactiv-G M-Hybrid 118 hp?
Stage 2 for the Mazda Mazda 3 1.5 Skyactiv-G M-Hybrid 118 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Mazda Mazda 3?
Stage 1 on the Mazda Mazda 3 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Mazda Mazda 3 1.5 Skyactiv-G M-Hybrid 118 hp done?
The full remap cycle for the Mazda Mazda 3 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Mazda Mazda 3?
The original Mazda Mazda 3 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Mazda Mazda 3 1.5 Skyactiv-G M-Hybrid 118 hp?
The cost of Stage 1 for the Mazda Mazda 3 1.5 Skyactiv-G M-Hybrid 118 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.