Mazda Mazda 3 1.5 Skyactiv-G 100 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Mazda Mazda 3 1.5 Skyactiv-G 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mazda Mazda 3 1.5 Skyactiv-G 100 hp ECU
Mazda Mazda 3 (2013) 1.5 Skyactiv-G 100 hp — mass-market petrol engine of the passenger segment of the Mazda Motor Corporation (независимый) group (Япония, 1920). Stage 1 chip tuning raises power from 100 to 120 hp (+20 hp, +20%) and torque from 150 to 160 Nm (+10 Nm). In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
Mazda is an independent brand (historically with a technical partnership with Ford). SkyActiv is Mazda's signature engine philosophy built around a high compression ratio. Mazda specialises in family saloons and compact crossovers. On mid-range Mazda petrol engines, Stage 1 delivers a modest gain (5-12%). Mazda's factory optimisation is close to the limit, leaving only modest headroom for Stage 1. SkyActiv-X is a unique petrol engine that uses compression ignition (HCCI).
Mazda has a limited chip tuning culture owing to its already optimised factory calibration. The SkyActiv technology is already close to its factory limit, leaving little headroom for Stage 1 without hardware changes. On SkyActiv-G, Stage 1 delivers a modest gain. There is little headroom for Stage 1 without hardware changes. Mid-range Mazda — SkyActiv engines with a conservative factory calibration.
Frequently asked questions
What is the Stage 1 effect on the Mazda Mazda 3 1.5 Skyactiv-G 100 hp?
Stage 1 for the Mazda Mazda 3 1.5 Skyactiv-G 100 hp adds +20 hp — power increases from 100 to 120 hp (+20%). Torque rises from 150 to 160 Nm (+10 Nm).
What does a Stage 1 remap of the Mazda Mazda 3 1.5 Skyactiv-G 100 hp include?
Stage 1 chip tuning of the Mazda Mazda 3 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +20 hp with no hardware changes.
Can you do Stage 1 on the Mazda Mazda 3 1.5 Skyactiv-G 100 hp?
Yes, Stage 1 for the Mazda Mazda 3 1.5 Skyactiv-G 100 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Mazda Mazda 3?
Stage 2 for the Mazda Mazda 3 1.5 Skyactiv-G 100 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the Mazda Mazda 3 warranty after chip tuning?
The factory warranty of the Mazda Mazda 3 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Mazda Mazda 3 take?
On the Mazda Mazda 3 1.5 Skyactiv-G 100 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Mazda Mazda 3?
Yes, the original ECU firmware of the Mazda Mazda 3 1.5 Skyactiv-G 100 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Mazda Mazda 3?
Stage 1 for the Mazda Mazda 3 1.5 Skyactiv-G 100 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.