Mazda Mazda 3 1.5 Skyactiv-D 105 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Mazda Mazda 3 1.5 Skyactiv-D 105 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mazda Mazda 3 1.5 Skyactiv-D 105 hp ECU
Mazda Mazda 3 (2013) 1.5 Skyactiv-D 105 hp — mass-market diesel engine of the passenger segment of the Mazda Motor Corporation (независимый) group (Япония, 1920). Stage 1 chip tuning raises power from 105 to 130 hp (+25 hp, +24%) and torque from 270 to 320 Nm (+50 Nm). In the CHIPOK database: 2 configurations · 2 ECU variants. The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The MX-5 (Miata) has been Mazda's iconic roadster since 1989. The RX (Wankel) is Mazda's historic rotary engine series. Mazda is a Japanese carmaker, founded in 1920 in Hiroshima. SkyActiv-D is Mazda's signature diesel range with a uniquely low compression ratio. On mid-range Mazda diesels, Stage 1 delivers a modest gain due to the already optimised factory calibration. SkyActiv-D is positioned as the cleanest diesel in the mainstream segment.
Mazda has a limited chip tuning culture owing to its already optimised factory calibration. The SkyActiv technology is already close to its factory limit, leaving little headroom for Stage 1 without hardware changes. On SkyActiv-D, Stage 1 delivers a modest gain (5-12%). Mid-range Mazda — SkyActiv engines with a conservative factory calibration. There is little headroom for Stage 1 without hardware changes.
Frequently asked questions
How much does the power of the Mazda Mazda 3 1.5 Skyactiv-D 105 hp increase after Stage 1?
After Stage 1 the power of the Mazda Mazda 3 1.5 Skyactiv-D 105 hp rises from 105 to 130 hp, a gain of 25 hp (+24%). Torque rises from 270 to 320 Nm (+50 Nm).
How does Stage 1 differ from stock on the Mazda Mazda 3?
Stage 1 chip tuning of the Mazda Mazda 3 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +25 hp with no hardware changes.
Can you do Stage 1 on the Mazda Mazda 3 1.5 Skyactiv-D 105 hp?
Yes, Stage 1 for the Mazda Mazda 3 1.5 Skyactiv-D 105 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Mazda Mazda 3?
Stage 2 on the Mazda Mazda 3 1.5 Skyactiv-D 105 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Mazda Mazda 3 warranty after chip tuning?
The factory warranty of the Mazda Mazda 3 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Mazda Mazda 3 take?
On the Mazda Mazda 3 1.5 Skyactiv-D 105 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Mazda Mazda 3?
Yes, the original ECU firmware of the Mazda Mazda 3 1.5 Skyactiv-D 105 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Mazda Mazda 3?
Stage 1 for the Mazda Mazda 3 1.5 Skyactiv-D 105 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.