Mazda Mazda 2 1.6 MZ-CD 90 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Mazda Mazda 2 1.6 MZ-CD 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mazda Mazda 2 1.6 MZ-CD 90 hp ECU
Mazda Mazda 2 (2007) 1.6 MZ-CD 90 hp — mass-market diesel engine of the passenger segment of the Mazda Motor Corporation (независимый) group (Япония, 1920). Stage 1 chip tuning raises power from 90 to 115 hp (+25 hp, +28%) and torque from 210 to 270 Nm (+60 Nm). In the CHIPOK database: 2 configurations. The 2007 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Mazda is a Japanese carmaker, founded in 1920 in Hiroshima. Mazda is an independent brand (historically with a technical partnership with Ford). SkyActiv is Mazda's signature engine philosophy built around a high compression ratio. DPF/SCR with AdBlue is standard on Euro-6 Mazda diesels. SkyActiv-D is positioned as the cleanest diesel in the mainstream segment. SkyActiv-D is Mazda's signature diesel range with a uniquely low compression ratio.
Mazda has a limited chip tuning culture owing to its already optimised factory calibration. The SkyActiv technology is already close to its factory limit, leaving little headroom for Stage 1 without hardware changes. Low-output Mazda models are naturally aspirated city cars with a high compression ratio.
Frequently asked questions
How many horsepower does the Mazda Mazda 2 1.6 MZ-CD 90 hp reach after a remap?
The Stage 1 gain for the Mazda Mazda 2 1.6 MZ-CD 90 hp is 25 hp (+28%) over the stock 90 hp, for a total of 115 hp. Torque rises from 210 to 270 Nm (+60 Nm).
What is Stage 1 chip tuning for the Mazda Mazda 2?
Stage 1 is a software optimization of the factory ECU firmware of the Mazda Mazda 2 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Is Stage 1 worth doing on the base Mazda Mazda 2?
Stage 1 on the base Mazda Mazda 2 is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Mazda Mazda 2 1.6 MZ-CD 90 hp?
Stage 2 on the Mazda Mazda 2 1.6 MZ-CD 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Mazda Mazda 2 remain valid after Stage 1?
After remapping the Mazda Mazda 2, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mazda Mazda 2?
Reading and writing via OBD takes 25-30 minutes on the Mazda Mazda 2. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mazda Mazda 2?
Before Stage 1 the original of the Mazda Mazda 2 1.6 MZ-CD 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mazda Mazda 2 1.6 MZ-CD 90 hp cost?
The remap price for the Mazda Mazda 2 1.6 MZ-CD 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.