Mazda Mazda 2 1.5 Skyactiv-G 115 hp — Stage 1 file (+13 hp)
hp
Stage 1 file for Mazda Mazda 2 1.5 Skyactiv-G 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mazda Mazda 2 1.5 Skyactiv-G 115 hp ECU
Mazda Mazda 2 (2007) 1.5 Skyactiv-G 115 hp — mass-market petrol engine of the passenger segment of the Mazda Motor Corporation (независимый) group (Япония, 1920). Stage 1 chip tuning raises power from 115 to 128 hp (+13 hp, +11%) and torque from 148 to 158 Nm (+10 Nm). In the CHIPOK database: 2 configurations. A petrol engine built in 2007 — the era before widespread firmware encryption, OBD flash without complications.
Mazda specialises in family saloons and compact crossovers. The MX-5 (Miata) has been Mazda's iconic roadster since 1989. The RX (Wankel) is Mazda's historic rotary engine series. On mid-range Mazda petrol engines, Stage 1 delivers a modest gain (5-12%). Mazda's factory optimisation is close to the limit, leaving only modest headroom for Stage 1. SkyActiv-X is a unique petrol engine that uses compression ignition (HCCI).
On SkyActiv-G, Stage 1 delivers a modest gain. Mazda has a limited chip tuning culture owing to its already optimised factory calibration. The SkyActiv technology is already close to its factory limit, leaving little headroom for Stage 1 without hardware changes. There is little headroom for Stage 1 without hardware changes. Mid-range Mazda — SkyActiv engines with a conservative factory calibration.
Frequently asked questions
How many horsepower does the Mazda Mazda 2 1.5 Skyactiv-G 115 hp reach after a remap?
Stage 1 for the Mazda Mazda 2 1.5 Skyactiv-G 115 hp adds +13 hp — power increases from 115 to 128 hp (+11%). Torque rises from 148 to 158 Nm (+10 Nm).
What does a Stage 1 remap of the Mazda Mazda 2 1.5 Skyactiv-G 115 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Mazda Mazda 2 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +13 hp with no hardware changes.
What is the risk of Stage 1 on the Mazda Mazda 2 1.5 Skyactiv-G 115 hp?
A remap of the Mazda Mazda 2 1.5 Skyactiv-G 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Mazda Mazda 2 1.5 Skyactiv-G 115 hp?
Stage 2 for the Mazda Mazda 2 1.5 Skyactiv-G 115 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Mazda Mazda 2 remain valid after Stage 1?
After remapping the Mazda Mazda 2, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mazda Mazda 2?
Reading and writing via OBD takes 25-30 minutes on the Mazda Mazda 2. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mazda Mazda 2?
Before Stage 1 the original of the Mazda Mazda 2 1.5 Skyactiv-G 115 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mazda Mazda 2 1.5 Skyactiv-G 115 hp cost?
The remap price for the Mazda Mazda 2 1.5 Skyactiv-G 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.