Mazda CX-3 2.0 Skyactiv-G 150 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Mazda CX-3 2.0 Skyactiv-G 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mazda CX-3 2.0 Skyactiv-G 150 hp ECU
Mazda CX-3 (2015) 2.0 Skyactiv-G 150 hp — mass-market petrol engine of the passenger segment of the Mazda Motor Corporation (независимый) group (Япония, 1920). Stage 1 chip tuning raises power from 150 to 175 hp (+25 hp, +17%) and torque from 210 to 220 Nm (+10 Nm). A petrol engine built in 2015 — a Tricore platform without strong protection; OBD access works.
Mazda specialises in family saloons and compact crossovers. The MX-5 (Miata) has been Mazda's iconic roadster since 1989. The RX (Wankel) is Mazda's historic rotary engine series. SkyActiv-X is a unique petrol engine that uses compression ignition (HCCI). SkyActiv-G is Mazda's signature naturally aspirated petrol range with a high compression ratio. On mid-range Mazda petrol engines, Stage 1 delivers a modest gain (5-12%).
On SkyActiv-G, Stage 1 delivers a modest gain. Mazda has a limited chip tuning culture owing to its already optimised factory calibration. The SkyActiv technology is already close to its factory limit, leaving little headroom for Stage 1 without hardware changes. There is little headroom for Stage 1 without hardware changes. Mid-range Mazda — SkyActiv engines with a conservative factory calibration.
Frequently asked questions
What is the Stage 1 effect on the Mazda CX-3 2.0 Skyactiv-G 150 hp?
Stage 1 chip tuning on the Mazda CX-3 2.0 Skyactiv-G 150 hp boosts engine output by 25 hp: from 150 to 175 hp. Torque rises from 210 to 220 Nm (+10 Nm).
What changes in the Mazda CX-3 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Mazda CX-3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
What is the risk of Stage 1 on the Mazda CX-3 2.0 Skyactiv-G 150 hp?
A remap of the Mazda CX-3 2.0 Skyactiv-G 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Mazda CX-3 2.0 Skyactiv-G 150 hp?
Stage 2 for the Mazda CX-3 2.0 Skyactiv-G 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Mazda CX-3 remain valid after Stage 1?
After remapping the Mazda CX-3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mazda CX-3?
Reading and writing via OBD takes 25-30 minutes on the Mazda CX-3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mazda CX-3?
Before Stage 1 the original of the Mazda CX-3 2.0 Skyactiv-G 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mazda CX-3 2.0 Skyactiv-G 150 hp cost?
The remap price for the Mazda CX-3 2.0 Skyactiv-G 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.