Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp ECU
Maserati Levante (2016) 3.8 V8 Bi-turbo (Trofeo) 580 hp — luxury petrol engine of the passenger segment of the Stellantis group (Италия, 1914). Stage 1 chip tuning raises power from 580 to 620 hp (+40 hp, +7%) and torque from 730 to 800 Nm (+70 Nm). This engine ships with different ECU variants: Bosch MED17.3.4, Bosch MED17.3.5. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HP70 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2016 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Maserati is an Italian premium-luxury manufacturer from Modena, founded in 1914. Maserati is part of the Stellantis group (formerly FCA). Maserati specialises in premium GT-class saloons, coupes and SUVs. The Maserati MC20 features the in-house-developed Nettuno engine. Top-tier Maserati engines have significant potential with a downpipe + intake. Maserati shared engines with Ferrari (naturally aspirated V8) until 2020.
The Maserati community is a premium-luxury chip tuning niche. With the right hardware, Maserati engines comfortably reach Stage 2. Top-tier Maserati engines sit at the power ceiling of the premium segment; the gain is significant. A Bench read is standard procedure on modern Maseratis.
The MC20 uses a dual-clutch automated gearbox. Top-tier Maserati models come with a reinforced ZF 8HP. Maserati uses the ZF 8HP — a premium 8-speed automatic.
Frequently asked questions
How much does the power of the Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp increase after Stage 1?
The Stage 1 gain for the Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp is 40 hp (+7%) over the stock 580 hp, for a total of 620 hp. Torque rises from 730 to 800 Nm (+70 Nm).
What is Stage 1 chip tuning for the Maserati Levante?
Stage 1 is a software optimization of the factory ECU firmware of the Maserati Levante with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
Does Stage 1 make sense on the Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp with this much power?
Stage 1 for the Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp?
Stage 2 on the Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp built with?
The Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp comes with 2 ECU variants: Bosch MED17.3.4, Bosch MED17.3.5. Calibration is done for the specific unit after the revision is identified.
What does remapping the ZF 8HP70 gearbox give on the Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp?
The ZF 8HP70 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Maserati Levante remain valid after Stage 1?
After remapping the Maserati Levante, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Maserati Levante?
Reading and writing via OBD takes 25-30 minutes on the Maserati Levante. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Maserati Levante?
Before Stage 1 the original of the Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp cost?
The remap price for the Maserati Levante 3.8 V8 Bi-turbo (Trofeo) 580 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.