Maserati Ghibli 3.0 V6 S 430 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Maserati Ghibli 3.0 V6 S 430 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Maserati Ghibli 3.0 V6 S 430 hp ECU
Maserati Ghibli (2013 - III) 3.0 V6 S 430 hp — luxury petrol engine of the passenger segment of the Stellantis group (Италия, 1914). Stage 1 chip tuning raises power from 430 to 460 hp (+30 hp, +7%) and torque from 580 to 680 Nm (+100 Nm). This engine ships with different ECU variants: Bosch MED17.3.4, Bosch MED17.3.5. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HP70 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
The Trident is Maserati's signature logo and a symbol of Modena. The Maserati range comprises the Quattroporte, Ghibli, Levante, GranTurismo and MC20. The Maserati MC20 is the brand's flagship supercar, powered by its own Nettuno engine. Maserati's petrol range comprises premium turbo engines and naturally aspirated V8s. The Maserati MC20 features the in-house-developed Nettuno engine. Top-tier Maserati engines have significant potential with a downpipe + intake.
With the right hardware, Maserati engines comfortably reach Stage 2. The Maserati community is a premium-luxury chip tuning niche. A Bench read is standard procedure on modern Maseratis. Top-tier Maserati engines sit at the power ceiling of the premium segment; the gain is significant.
The MC20 uses a dual-clutch automated gearbox. Top-tier Maserati models come with a reinforced ZF 8HP. Maserati uses the ZF 8HP — a premium 8-speed automatic.
Frequently asked questions
How much horsepower does Stage 1 add for the Maserati Ghibli 3.0 V6 S 430 hp?
Stage 1 chip tuning on the Maserati Ghibli 3.0 V6 S 430 hp boosts engine output by 30 hp: from 430 to 460 hp. Torque rises from 580 to 680 Nm (+100 Nm).
What changes in the Maserati Ghibli ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Maserati Ghibli with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
Does Stage 1 make sense on the Maserati Ghibli 3.0 V6 S 430 hp with this much power?
On the top-spec Maserati Ghibli 3.0 V6 S 430 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Maserati Ghibli 3.0 V6 S 430 hp?
Stage 2 for the Maserati Ghibli 3.0 V6 S 430 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Maserati Ghibli 3.0 V6 S 430 hp built with?
The Maserati Ghibli 3.0 V6 S 430 hp comes with 2 ECU variants: Bosch MED17.3.4, Bosch MED17.3.5. Calibration is done for the specific unit after the revision is identified.
What does remapping the ZF 8HP70 gearbox give on the Maserati Ghibli 3.0 V6 S 430 hp?
The ZF 8HP70 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Maserati Ghibli remain valid after Stage 1?
After remapping the Maserati Ghibli, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Maserati Ghibli?
Reading and writing via OBD takes 25-30 minutes on the Maserati Ghibli. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Maserati Ghibli?
Before Stage 1 the original of the Maserati Ghibli 3.0 V6 S 430 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Maserati Ghibli 3.0 V6 S 430 hp cost?
The remap price for the Maserati Ghibli 3.0 V6 S 430 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.