MAN TGS TGS 460 460hp (338kW) 2100Nm — Stage 1 file (+71 hp)
hp
Stage 1 file for MAN TGS TGS 460 460hp (338kW) 2100Nm
Target +0 hp. Custom development for your engine.
Chip tuning for MAN TGS TGS 460 460hp (338kW) 2100Nm ECU
MAN TGS (I) TGS 460 460hp (338kW) 2100Nm — commercial diesel engine of the commercial segment of the TRATON Group (Volkswagen Truck & Bus) group (Германия, 1758). Stage 1 chip tuning raises power from 460 to 531 hp (+71 hp, +15%) and torque from 2100 to 2415 Nm (+315 Nm).
MAN shares some engines and platforms with Scania within TRATON. MAN is part of the TRATON Group (the Volkswagen Truck & Bus division). The TGS, TGX and TGM are MAN's main truck series. Top diesels in long-haul tractors sit at the power ceiling, and Stage 2 requires hardware. Mid-generation truck models use standard OBD read/write. Truck diesels carry an extended set of maps for commercial load, with the focus on torque.
The professional logistics segment tunes for fuel consumption and pulling characteristics. The truck chip tuning community is an industry of its own, focused on long-haul routes. Top MAN units sit at the power ceiling of the European truck segment.
Frequently asked questions
What is the Stage 1 effect on the MAN TGS TGS 460 460hp (338kW) 2100Nm?
After Stage 1 the power of the MAN TGS TGS 460 460hp (338kW) 2100Nm rises from 460 to 531 hp, a gain of 71 hp (+15%). Torque rises from 2100 to 2415 Nm (+315 Nm).
How does Stage 1 differ from stock on the MAN TGS?
Stage 1 is a software optimization of the factory ECU firmware of the MAN TGS with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +71 hp with no hardware changes.
Does Stage 1 make sense on the MAN TGS TGS 460 460hp (338kW) 2100Nm with this much power?
Stage 1 for the MAN TGS TGS 460 460hp (338kW) 2100Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the MAN TGS TGS 460 460hp (338kW) 2100Nm?
Stage 2 on the MAN TGS TGS 460 460hp (338kW) 2100Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the MAN TGS remain valid after Stage 1?
After remapping the MAN TGS, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the MAN TGS?
Reading and writing via OBD takes 25-30 minutes on the MAN TGS. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the MAN TGS?
Before Stage 1 the original of the MAN TGS TGS 460 460hp (338kW) 2100Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the MAN TGS TGS 460 460hp (338kW) 2100Nm cost?
The remap price for the MAN TGS TGS 460 460hp (338kW) 2100Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.