MAN TGS TGS 360 360hp (265kW) 1800Nm — Stage 1 file (+55 hp)
hp
Stage 1 file for MAN TGS TGS 360 360hp (265kW) 1800Nm
Target +0 hp. Custom development for your engine.
Chip tuning for MAN TGS TGS 360 360hp (265kW) 1800Nm ECU
MAN TGS (I) TGS 360 360hp (265kW) 1800Nm — commercial diesel engine of the commercial segment of the TRATON Group (Volkswagen Truck & Bus) group (Германия, 1758). Stage 1 chip tuning raises power from 360 to 415 hp (+55 hp, +15%) and torque from 1800 to 2070 Nm (+270 Nm).
MAN shares some engines and platforms with Scania within TRATON. MAN is part of the TRATON Group (the Volkswagen Truck & Bus division). The TGS, TGX and TGM are MAN's main truck series. Mid-generation truck models use standard OBD read/write. Truck diesels carry an extended set of maps for commercial load, with the focus on torque. DPF/SCR with AdBlue is standard on modern Euro-6 truck engines.
The truck chip tuning community is an industry of its own, focused on long-haul routes. The professional logistics segment tunes for fuel consumption and pulling characteristics. Top MAN units sit at the power ceiling of the European truck segment.
Frequently asked questions
What is the Stage 1 effect on the MAN TGS TGS 360 360hp (265kW) 1800Nm?
Stage 1 for the MAN TGS TGS 360 360hp (265kW) 1800Nm adds +55 hp — power increases from 360 to 415 hp (+15%). Torque rises from 1800 to 2070 Nm (+270 Nm).
What does a Stage 1 remap of the MAN TGS TGS 360 360hp (265kW) 1800Nm include?
Stage 1 chip tuning of the MAN TGS is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +55 hp with no hardware changes.
What is the Stage 1 potential of the MAN TGS TGS 360 360hp (265kW) 1800Nm?
On the top-spec MAN TGS TGS 360 360hp (265kW) 1800Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How much does Stage 2 add on the MAN TGS?
Stage 2 for the MAN TGS TGS 360 360hp (265kW) 1800Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the MAN TGS warranty after chip tuning?
The factory warranty of the MAN TGS does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the MAN TGS take?
On the MAN TGS TGS 360 360hp (265kW) 1800Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the MAN TGS?
Yes, the original ECU firmware of the MAN TGS TGS 360 360hp (265kW) 1800Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the MAN TGS?
Stage 1 for the MAN TGS TGS 360 360hp (265kW) 1800Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.