Mahindra Bolero 2.5D 75 hp — Stage 1 file (+5 hp)
hp
Stage 1 file for Mahindra Bolero 2.5D 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mahindra Bolero 2.5D 75 hp ECU
Mahindra Bolero (2019) 2.5D 75 hp — agricultural diesel engine of the passenger segment of the Mahindra & Mahindra group (Индия, 1945). Stage 1 chip tuning raises power from 75 to 80 hp (+5 hp, +7%) and torque from 195 to 200 Nm (+5 Nm). This engine ships with different ECU variants: Bosch EDC17C61, Bosch MD1CS018. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern diesel built in 2019 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Mahindra is the world's largest tractor manufacturer by volume. Mahindra specialises in compact and mid-size tractors. Mahindra is an Indian manufacturer of tractors and cars, founded in 1945. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Маломощные агро-дизели — компактная техника; Stage 1 безопасный.
Сельхозсегмент — расход и тяга важнее л.с. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Защита на современных агро-моделях — Tricore, часто Bench. Маломощные Mahindra — компактная техника; Stage 1 безопасный.
Frequently asked questions
How much horsepower does Stage 1 add for the Mahindra Bolero 2.5D 75 hp?
The Stage 1 gain for the Mahindra Bolero 2.5D 75 hp is 5 hp (+7%) over the stock 75 hp, for a total of 80 hp. Torque rises from 195 to 200 Nm (+5 Nm).
What is Stage 1 chip tuning for the Mahindra Bolero?
Stage 1 chip tuning of the Mahindra Bolero is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +5 hp with no hardware changes.
What does chip tuning give on the low-output Mahindra Bolero 2.5D 75 hp?
Stage 1 on the base Mahindra Bolero is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Mahindra Bolero?
Stage 2 on the Mahindra Bolero 2.5D 75 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Mahindra Bolero 2.5D 75 hp?
The Mahindra Bolero 2.5D 75 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17C61, Bosch MD1CS018. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Mahindra Bolero warranty after chip tuning?
The factory warranty of the Mahindra Bolero does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Mahindra Bolero take?
On the Mahindra Bolero 2.5D 75 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Mahindra Bolero?
Yes, the original ECU firmware of the Mahindra Bolero 2.5D 75 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Mahindra Bolero?
Stage 1 for the Mahindra Bolero 2.5D 75 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.