Mahindra Bolero 2.5D 63 hp — Stage 1 file (+12 hp)
hp
Stage 1 file for Mahindra Bolero 2.5D 63 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mahindra Bolero 2.5D 63 hp ECU
Mahindra Bolero (2019) 2.5D 63 hp — agricultural diesel engine of the passenger segment of the Mahindra & Mahindra group (Индия, 1945). Stage 1 chip tuning raises power from 63 to 75 hp (+12 hp, +19%) and torque from 195 to 200 Nm (+5 Nm). ECU — Bosch EDC17C61. Flashing method: OBD or Bench depending on the unit's protection. A 2019 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
Mahindra is an Indian manufacturer of tractors and cars, founded in 1945. Mahindra is the world's largest tractor manufacturer by volume. Mahindra specialises in compact and mid-size tractors. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1.
Защита на современных агро-моделях — Tricore, часто Bench. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Mahindra — компактная техника; Stage 1 безопасный.
Frequently asked questions
How much does the power of the Mahindra Bolero 2.5D 63 hp increase after Stage 1?
Stage 1 chip tuning on the Mahindra Bolero 2.5D 63 hp boosts engine output by 12 hp: from 63 to 75 hp. Torque rises from 195 to 200 Nm (+5 Nm).
What changes in the Mahindra Bolero ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Mahindra Bolero with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +12 hp with no hardware changes.
Is Stage 1 worth doing on the base Mahindra Bolero?
Yes, Stage 1 on the low-output Mahindra Bolero 2.5D 63 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Mahindra Bolero 2.5D 63 hp?
Stage 2 for the Mahindra Bolero 2.5D 63 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Mahindra Bolero 2.5D 63 hp use?
The Mahindra Bolero 2.5D 63 hp is fitted with the Bosch EDC17C61 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Mahindra Bolero remain valid after Stage 1?
After remapping the Mahindra Bolero, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mahindra Bolero?
Reading and writing via OBD takes 25-30 minutes on the Mahindra Bolero. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mahindra Bolero?
Before Stage 1 the original of the Mahindra Bolero 2.5D 63 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mahindra Bolero 2.5D 63 hp cost?
The remap price for the Mahindra Bolero 2.5D 63 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.