Lexus CT 200h (1.8 E-CVT) 99 hp — Stage 1 file (+6 hp)
hp
Stage 1 file for Lexus CT 200h (1.8 E-CVT) 99 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Lexus CT 200h (1.8 E-CVT) 99 hp ECU
Lexus CT (2011) 200h (1.8 E-CVT) 99 hp — premium hybrid engine of the passenger segment of the Toyota Motor Corporation group (Япония, 1937). Stage 1 chip tuning raises power from 99 to 105 hp (+6 hp, +6%) and torque from 142 to 150 Nm (+8 Nm). ECU — Denso 76F00XX. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations.
F is Lexus's performance division (LFA, RC F, IS F). The Lexus LC and LS are the brand's flagship models, powered by V8 and V6 engines. Lexus specialises in premium saloons and SUVs. Toyota is the world leader in hybrid production volume. Toyota PHEV variants include the Prius Prime, RAV4 Prime and Highlander Hybrid Plug-in. The bZ4X is Toyota's flagship electric crossover.
The Denso ECU is a locked Toyota platform, and most models do not respond to standard chip tuning. Toyota has an active JDM tuning community (GR Supra, GR Yaris, GR86). The Toyota Denso ECU requires dedicated read/write tooling. Toyota's factory tuning runs close to the limit, leaving only modest headroom for Stage 1. Low-output Toyotas are naturally aspirated city cars, where Stage 1 is limited by the high compression ratio.
Frequently asked questions
How much does the power of the Lexus CT 200h (1.8 E-CVT) 99 hp increase after Stage 1?
Stage 1 chip tuning on the Lexus CT 200h (1.8 E-CVT) 99 hp boosts engine output by 6 hp: from 99 to 105 hp. Torque rises from 142 to 150 Nm (+8 Nm).
What changes in the Lexus CT ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Lexus CT with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +6 hp with no hardware changes.
Is Stage 1 worth doing on the base Lexus CT?
Yes, Stage 1 on the low-output Lexus CT 200h (1.8 E-CVT) 99 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Lexus CT 200h (1.8 E-CVT) 99 hp?
Stage 2 for the Lexus CT 200h (1.8 E-CVT) 99 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Lexus CT 200h (1.8 E-CVT) 99 hp use?
The Lexus CT 200h (1.8 E-CVT) 99 hp is fitted with the Denso 76F00XX ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Lexus CT remain valid after Stage 1?
After remapping the Lexus CT, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Lexus CT?
Reading and writing via OBD takes 25-30 minutes on the Lexus CT. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Lexus CT?
Before Stage 1 the original of the Lexus CT 200h (1.8 E-CVT) 99 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Lexus CT 200h (1.8 E-CVT) 99 hp cost?
The remap price for the Lexus CT 200h (1.8 E-CVT) 99 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.