LDV Maxus V80 2.8TDI — Stage 1 file
hp
Stage 1 file for LDV Maxus V80 2.8TDI
Target +0 hp. Custom development for your engine.
Chip tuning for LDV Maxus V80 2.8TDI ECU
LDV Maxus V80 (2021-) 2.8TDI — mass-market diesel engine of the passenger segment of the SAIC Motor group (Великобритания / Китай, 1993). ECU — Bosch EDC17C81. Flashing method: OBD or Bench depending on the unit's protection. A 2021 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
LDV focuses on the mass market — saloons, crossovers and SUVs. LDV is a British commercial-vehicle brand owned by SAIC Motor (revived under the Maxus name). LDV is part of the SAIC Motor group. LDV runs mostly petrol engines; diesels are rare in the current range. DPF/SCR is standard on modern diesel models. Mid-range diesels see a modest gain from Stage 1.
Protection on modern Chinese models often calls for Bench access on the top variants. The LDV community in China and the CIS is a growing chip tuning market. Mid-range LDV — a high-volume chip tuning subject in a growing market.
Frequently asked questions
What does a Stage 1 remap of the LDV Maxus V80 2.8TDI include?
Stage 1 on the LDV Maxus V80 2.8TDI is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved.
Is a Stage 1 remap safe for the 2.8TDI?
Stage 1 on the LDV Maxus V80 2.8TDI is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the LDV Maxus V80 2.8TDI?
Stage 2 for the LDV Maxus V80 2.8TDI is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the LDV Maxus V80 2.8TDI run?
The control unit of the LDV Maxus V80 2.8TDI is the Bosch EDC17C81. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the LDV Maxus V80?
Stage 1 on the LDV Maxus V80 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the LDV Maxus V80 2.8TDI done?
The full remap cycle for the LDV Maxus V80 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the LDV Maxus V80?
The original LDV Maxus V80 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the LDV Maxus V80 2.8TDI?
The cost of Stage 1 for the LDV Maxus V80 2.8TDI is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.