Land-Rover Velar 3.0 V6 supercharged 380 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Land-Rover Velar 3.0 V6 supercharged 380 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Land-Rover Velar 3.0 V6 supercharged 380 hp ECU
Land-Rover Velar (2017) 3.0 V6 supercharged 380 hp — premium petrol engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 380 to 400 hp (+20 hp, +5%) and torque from 460 to 480 Nm (+20 Nm). This engine ships with different ECU variants: Bosch MED17.8.3, Bosch MED17.8.31, Bosch MED17.8.32. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 4 configurations · 4 ECU variants. A petrol engine built in 2017 — a Tricore platform without strong protection; OBD access works.
The Range Rover is the flagship of the premium SUV segment and an iconic model for the brand. The Defender is an off-roader with a legendary reputation for capability. Land Rover shares platforms and engines with Jaguar within JLR. The Jaguar V8 Supercharged is an iconic premium-segment engine. Jaguar's petrol range spans turbocharged Ingenium units and supercharged V6/V8 engines. The supercharged Jaguar V8 has significant potential with hardware upgrades.
The supercharged Jaguar V8 comfortably reaches Stage 2 with the right hardware. The Jaguar community is a premium chip tuning niche in the UK and Europe. The top Jaguar SVR engines (supercharged V8) mark the ceiling of British premium performance.
SVR models use a reinforced ZF 8HP. Jaguar uses the ZF 8HP, a premium 8-speed automatic.
Frequently asked questions
How many horsepower does the Land-Rover Velar 3.0 V6 supercharged 380 hp reach after a remap?
Stage 1 chip tuning on the Land-Rover Velar 3.0 V6 supercharged 380 hp boosts engine output by 20 hp: from 380 to 400 hp. Torque rises from 460 to 480 Nm (+20 Nm).
What changes in the Land-Rover Velar ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Land-Rover Velar with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Does Stage 1 make sense on the Land-Rover Velar 3.0 V6 supercharged 380 hp with this much power?
On the top-spec Land-Rover Velar 3.0 V6 supercharged 380 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Land-Rover Velar 3.0 V6 supercharged 380 hp?
Stage 2 for the Land-Rover Velar 3.0 V6 supercharged 380 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Land-Rover Velar 3.0 V6 supercharged 380 hp built with?
The Land-Rover Velar 3.0 V6 supercharged 380 hp comes with 3 ECU variants: Bosch MED17.8.3, Bosch MED17.8.31, Bosch MED17.8.32. Calibration is done for the specific unit after the revision is identified.
What does remapping the ZF 8HPxx gearbox give on the Land-Rover Velar 3.0 V6 supercharged 380 hp?
The ZF 8HPxx TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Land-Rover Velar remain valid after Stage 1?
After remapping the Land-Rover Velar, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Land-Rover Velar?
Reading and writing via OBD takes 25-30 minutes on the Land-Rover Velar. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Land-Rover Velar?
Before Stage 1 the original of the Land-Rover Velar 3.0 V6 supercharged 380 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Land-Rover Velar 3.0 V6 supercharged 380 hp cost?
The remap price for the Land-Rover Velar 3.0 V6 supercharged 380 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.