Land-Rover Velar 3.0 D300 MHEV 300 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Land-Rover Velar 3.0 D300 MHEV 300 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Land-Rover Velar 3.0 D300 MHEV 300 hp ECU
Land-Rover Velar (2017) 3.0 D300 MHEV 300 hp — premium diesel engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 300 to 330 hp (+30 hp, +10%) and torque from 650 to 720 Nm (+70 Nm). This engine ships with different ECU variants: Bosch EDC17CP55, Bosch MD1CP007. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. A diesel built in 2017 — the Tricore ECU era; OBD flash works on most production revisions.
The Range Rover is the flagship of the premium SUV segment and an iconic model for the brand. The Defender is an off-roader with a legendary reputation for capability. Land Rover shares platforms and engines with Jaguar within JLR. DPF/SCR with AdBlue is standard on Euro-6 Jaguar diesels. High-output Jaguar diesels power the top F-Pace, XF and XJ variants. Ingenium Diesel is JLR's modern diesel range.
The Jaguar community is a premium chip tuning niche in the UK and Europe. High-output Jaguars — the F-Type and F-Pace SVR — offer solid headroom for Stage 1.
Jaguar uses the ZF 8HP, a premium 8-speed automatic.
Frequently asked questions
How much does the power of the Land-Rover Velar 3.0 D300 MHEV 300 hp increase after Stage 1?
Stage 1 for the Land-Rover Velar 3.0 D300 MHEV 300 hp adds +30 hp — power increases from 300 to 330 hp (+10%). Torque rises from 650 to 720 Nm (+70 Nm).
What does a Stage 1 remap of the Land-Rover Velar 3.0 D300 MHEV 300 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Land-Rover Velar with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Land-Rover Velar?
Stage 1 on the powerful Land-Rover Velar 3.0 D300 MHEV 300 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Land-Rover Velar 3.0 D300 MHEV 300 hp?
Stage 2 for the Land-Rover Velar 3.0 D300 MHEV 300 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Land-Rover Velar 3.0 D300 MHEV 300 hp built with?
The Land-Rover Velar 3.0 D300 MHEV 300 hp comes with 2 ECU variants: Bosch EDC17CP55, Bosch MD1CP007. Calibration is done for the specific unit after the revision is identified.
What does remapping the ZF 8HPxx gearbox give on the Land-Rover Velar 3.0 D300 MHEV 300 hp?
The ZF 8HPxx TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Land-Rover Velar remain valid after Stage 1?
After remapping the Land-Rover Velar, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Land-Rover Velar?
Reading and writing via OBD takes 25-30 minutes on the Land-Rover Velar. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Land-Rover Velar?
Before Stage 1 the original of the Land-Rover Velar 3.0 D300 MHEV 300 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Land-Rover Velar 3.0 D300 MHEV 300 hp cost?
The remap price for the Land-Rover Velar 3.0 D300 MHEV 300 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.