Land-Rover Velar 2.0T 300 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Land-Rover Velar 2.0T 300 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Land-Rover Velar 2.0T 300 hp ECU
Land-Rover Velar (2017) 2.0T 300 hp — premium petrol engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 300 to 325 hp (+25 hp, +8%) and torque from 400 to 480 Nm (+80 Nm). ECU — Bosch MED17.9.9. Flashing method: OBD or Bench depending on the unit's protection. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Land Rover is a British manufacturer of premium off-roaders and SUVs, founded in 1948. Land Rover is part of Tata Motors via Jaguar Land Rover (JLR). Land Rover specialises in premium off-roaders — the Range Rover, Discovery and Defender. Jaguar's petrol range spans turbocharged Ingenium units and supercharged V6/V8 engines. High-output Jaguar turbo-petrol engines deliver a solid Stage 1 gain. Jaguar shares some ECUs with Ford (a Visteon legacy).
The Jaguar community is a premium chip tuning niche in the UK and Europe. High-output Jaguars — the F-Type and F-Pace SVR — offer solid headroom for Stage 1.
Jaguar uses the ZF 8HP, a premium 8-speed automatic.
Frequently asked questions
What is the Stage 1 effect on the Land-Rover Velar 2.0T 300 hp?
After Stage 1 the power of the Land-Rover Velar 2.0T 300 hp rises from 300 to 325 hp, a gain of 25 hp (+8%). Torque rises from 400 to 480 Nm (+80 Nm).
How does Stage 1 differ from stock on the Land-Rover Velar?
Stage 1 is a software optimization of the factory ECU firmware of the Land-Rover Velar with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Land-Rover Velar?
The high-output Land-Rover Velar 2.0T 300 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Land-Rover Velar 2.0T 300 hp?
Stage 2 on the Land-Rover Velar 2.0T 300 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Land-Rover Velar 2.0T 300 hp use?
The Land-Rover Velar 2.0T 300 hp is fitted with the Bosch MED17.9.9 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the ZF 8HPxx gearbox give on the Land-Rover Velar 2.0T 300 hp?
The ZF 8HPxx TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Land-Rover Velar remain valid after Stage 1?
After remapping the Land-Rover Velar, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Land-Rover Velar?
Reading and writing via OBD takes 25-30 minutes on the Land-Rover Velar. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Land-Rover Velar?
Before Stage 1 the original of the Land-Rover Velar 2.0T 300 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Land-Rover Velar 2.0T 300 hp cost?
The remap price for the Land-Rover Velar 2.0T 300 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.