Land-Rover Freelander 2.2 SD4 190 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Land-Rover Freelander 2.2 SD4 190 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Land-Rover Freelander 2.2 SD4 190 hp ECU
Land-Rover Freelander (2011) 2.2 SD4 190 hp — premium diesel engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 190 to 210 hp (+20 hp, +11%) and torque from 420 to 470 Nm (+50 Nm). ECU — Bosch EDC17CP42. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2011 — the Tricore ECU era; OBD flash works on most production revisions.
The Range Rover is the flagship of the premium SUV segment and an iconic model for the brand. The Defender is an off-roader with a legendary reputation for capability. Land Rover shares platforms and engines with Jaguar within JLR. DPF/SCR with AdBlue is standard on Euro-6 Jaguar diesels. Mid-range Jaguar diesels sit in the premium segment. Ingenium Diesel is JLR's modern diesel range.
Stage 1 on Jaguar diesels delivers a noticeable torque gain. The Jaguar community is a premium chip tuning niche in the UK and Europe. Mid-range Jaguars are premium saloons with solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Land-Rover Freelander 2.2 SD4 190 hp?
Stage 1 chip tuning on the Land-Rover Freelander 2.2 SD4 190 hp boosts engine output by 20 hp: from 190 to 210 hp. Torque rises from 420 to 470 Nm (+50 Nm).
What changes in the Land-Rover Freelander ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Land-Rover Freelander with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
What is the risk of Stage 1 on the Land-Rover Freelander 2.2 SD4 190 hp?
A remap of the Land-Rover Freelander 2.2 SD4 190 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Land-Rover Freelander 2.2 SD4 190 hp?
Stage 2 for the Land-Rover Freelander 2.2 SD4 190 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Land-Rover Freelander 2.2 SD4 190 hp use?
The Land-Rover Freelander 2.2 SD4 190 hp is fitted with the Bosch EDC17CP42 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Land-Rover Freelander remain valid after Stage 1?
After remapping the Land-Rover Freelander, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Land-Rover Freelander?
Reading and writing via OBD takes 25-30 minutes on the Land-Rover Freelander. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Land-Rover Freelander?
Before Stage 1 the original of the Land-Rover Freelander 2.2 SD4 190 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Land-Rover Freelander 2.2 SD4 190 hp cost?
The remap price for the Land-Rover Freelander 2.2 SD4 190 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.