Land-Rover Evoque 2.0 SI4 240 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Land-Rover Evoque 2.0 SI4 240 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Land-Rover Evoque 2.0 SI4 240 hp ECU
Land-Rover Evoque (2015) 2.0 SI4 240 hp — premium petrol engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 240 to 270 hp (+30 hp, +12%) and torque from 340 to 400 Nm (+60 Nm). This engine ships with different ECU variants: Bosch MED17.0, Bosch MED17.9.7. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: ZF 8HPxx, ZF 9HP48 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 8 configurations · 4 ECU variants. A petrol engine built in 2015 — a Tricore platform without strong protection; OBD access works.
The Range Rover is the flagship of the premium SUV segment and an iconic model for the brand. The Defender is an off-roader with a legendary reputation for capability. Land Rover shares platforms and engines with Jaguar within JLR. The Jaguar V8 Supercharged is an iconic premium-segment engine. Jaguar's petrol range spans turbocharged Ingenium units and supercharged V6/V8 engines. High-output Jaguar turbo-petrol engines deliver a solid Stage 1 gain.
The Jaguar community is a premium chip tuning niche in the UK and Europe. High-output Jaguars — the F-Type and F-Pace SVR — offer solid headroom for Stage 1.
Jaguar uses the ZF 8HP, a premium 8-speed automatic.
Frequently asked questions
What power gain do you get after chip tuning the Land-Rover Evoque 2.0 SI4 240 hp?
Stage 1 chip tuning on the Land-Rover Evoque 2.0 SI4 240 hp boosts engine output by 30 hp: from 240 to 270 hp. Torque rises from 340 to 400 Nm (+60 Nm).
What changes in the Land-Rover Evoque ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Land-Rover Evoque with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Land-Rover Evoque?
Stage 1 on the powerful Land-Rover Evoque 2.0 SI4 240 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Land-Rover Evoque 2.0 SI4 240 hp?
Stage 2 for the Land-Rover Evoque 2.0 SI4 240 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Land-Rover Evoque 2.0 SI4 240 hp built with?
The Land-Rover Evoque 2.0 SI4 240 hp comes with 2 ECU variants: Bosch MED17.0, Bosch MED17.9.7. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (ZF 8HPxx, ZF 9HP48) on the Land-Rover Evoque be calibrated?
The Land-Rover Evoque 2.0 SI4 240 hp has 2 TCU variants: ZF 8HPxx, ZF 9HP48. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Land-Rover Evoque remain valid after Stage 1?
After remapping the Land-Rover Evoque, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Land-Rover Evoque?
Reading and writing via OBD takes 25-30 minutes on the Land-Rover Evoque. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Land-Rover Evoque?
Before Stage 1 the original of the Land-Rover Evoque 2.0 SI4 240 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Land-Rover Evoque 2.0 SI4 240 hp cost?
The remap price for the Land-Rover Evoque 2.0 SI4 240 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.