Land-Rover Evoque 2.2 TD4 150 hp — Stage 1 file (+55 hp)
hp
Stage 1 file for Land-Rover Evoque 2.2 TD4 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Land-Rover Evoque 2.2 TD4 150 hp ECU
Land-Rover Evoque (2011) 2.2 TD4 150 hp — premium diesel engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 150 to 205 hp (+55 hp, +37%) and torque from 400 to 480 Nm (+80 Nm). This engine ships with different ECU variants: Bosch EDC16CP39, Bosch EDC17CP42. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2011 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Land Rover is a British manufacturer of premium off-roaders and SUVs, founded in 1948. Land Rover is part of Tata Motors via Jaguar Land Rover (JLR). Land Rover specialises in premium off-roaders — the Range Rover, Discovery and Defender. DPF/SCR with AdBlue is standard on Euro-6 Jaguar diesels. Mid-range Jaguar diesels sit in the premium segment. Ingenium Diesel is JLR's modern diesel range.
The Jaguar community is a premium chip tuning niche in the UK and Europe. Stage 1 on Jaguar diesels delivers a noticeable torque gain. Mid-range Jaguars are premium saloons with solid headroom for Stage 1.
Frequently asked questions
What is the Stage 1 effect on the Land-Rover Evoque 2.2 TD4 150 hp?
After Stage 1 the power of the Land-Rover Evoque 2.2 TD4 150 hp rises from 150 to 205 hp, a gain of 55 hp (+37%). Torque rises from 400 to 480 Nm (+80 Nm).
How does Stage 1 differ from stock on the Land-Rover Evoque?
Stage 1 is a software optimization of the factory ECU firmware of the Land-Rover Evoque with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +55 hp with no hardware changes.
What is the risk of Stage 1 on the Land-Rover Evoque 2.2 TD4 150 hp?
A remap of the Land-Rover Evoque 2.2 TD4 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Land-Rover Evoque 2.2 TD4 150 hp?
Stage 2 on the Land-Rover Evoque 2.2 TD4 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Land-Rover Evoque 2.2 TD4 150 hp built with?
The Land-Rover Evoque 2.2 TD4 150 hp comes with 2 ECU variants: Bosch EDC16CP39, Bosch EDC17CP42. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Land-Rover Evoque remain valid after Stage 1?
After remapping the Land-Rover Evoque, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Land-Rover Evoque?
Reading and writing via OBD takes 25-30 minutes on the Land-Rover Evoque. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Land-Rover Evoque?
Before Stage 1 the original of the Land-Rover Evoque 2.2 TD4 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Land-Rover Evoque 2.2 TD4 150 hp cost?
The remap price for the Land-Rover Evoque 2.2 TD4 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.