Land-Rover Evoque 2.2 SD4 190 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Land-Rover Evoque 2.2 SD4 190 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Land-Rover Evoque 2.2 SD4 190 hp ECU
Land-Rover Evoque (2011) 2.2 SD4 190 hp — premium diesel engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 190 to 210 hp (+20 hp, +11%) and torque from 420 to 470 Nm (+50 Nm). ECU — Bosch EDC17CP42. Flashing method: OBD or Bench depending on the unit's protection. The 2011 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Land Rover specialises in premium off-roaders — the Range Rover, Discovery and Defender. The Range Rover is the flagship of the premium SUV segment and an iconic model for the brand. The Defender is an off-roader with a legendary reputation for capability. Ingenium Diesel is JLR's modern diesel range. DPF/SCR with AdBlue is standard on Euro-6 Jaguar diesels. Mid-range Jaguar diesels sit in the premium segment.
The Jaguar community is a premium chip tuning niche in the UK and Europe. Stage 1 on Jaguar diesels delivers a noticeable torque gain. Mid-range Jaguars are premium saloons with solid headroom for Stage 1.
Frequently asked questions
What is the Stage 1 effect on the Land-Rover Evoque 2.2 SD4 190 hp?
After Stage 1 the power of the Land-Rover Evoque 2.2 SD4 190 hp rises from 190 to 210 hp, a gain of 20 hp (+11%). Torque rises from 420 to 470 Nm (+50 Nm).
How does Stage 1 differ from stock on the Land-Rover Evoque?
Stage 1 on the Land-Rover Evoque 2.2 SD4 190 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.2 SD4 190 hp?
Stage 1 on the Land-Rover Evoque 2.2 SD4 190 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Land-Rover Evoque 2.2 SD4 190 hp?
Stage 2 on the Land-Rover Evoque 2.2 SD4 190 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Land-Rover Evoque 2.2 SD4 190 hp run?
The control unit of the Land-Rover Evoque 2.2 SD4 190 hp is the Bosch EDC17CP42. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Land-Rover Evoque?
Stage 1 on the Land-Rover Evoque voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Land-Rover Evoque 2.2 SD4 190 hp done?
The full remap cycle for the Land-Rover Evoque — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Land-Rover Evoque?
The original Land-Rover Evoque ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Land-Rover Evoque 2.2 SD4 190 hp?
The cost of Stage 1 for the Land-Rover Evoque 2.2 SD4 190 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.