Land-Rover Evoque 2.2 eD4 150 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Land-Rover Evoque 2.2 eD4 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Land-Rover Evoque 2.2 eD4 150 hp ECU
Land-Rover Evoque (2011) 2.2 eD4 150 hp — premium diesel engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 150 to 200 hp (+50 hp, +33%) and torque from 400 to 470 Nm (+70 Nm). ECU — Bosch EDC17CP42. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2011 — the Tricore ECU era; OBD flash works on most production revisions.
Land Rover shares platforms and engines with Jaguar within JLR. Land Rover is a British manufacturer of premium off-roaders and SUVs, founded in 1948. Land Rover is part of Tata Motors via Jaguar Land Rover (JLR). Ingenium Diesel is JLR's modern diesel range. DPF/SCR with AdBlue is standard on Euro-6 Jaguar diesels. Mid-range Jaguar diesels sit in the premium segment.
Stage 1 on Jaguar diesels delivers a noticeable torque gain. The Jaguar community is a premium chip tuning niche in the UK and Europe. Mid-range Jaguars are premium saloons with solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Land-Rover Evoque 2.2 eD4 150 hp?
Stage 1 for the Land-Rover Evoque 2.2 eD4 150 hp adds +50 hp — power increases from 150 to 200 hp (+33%). Torque rises from 400 to 470 Nm (+70 Nm).
What does a Stage 1 remap of the Land-Rover Evoque 2.2 eD4 150 hp include?
Stage 1 on the Land-Rover Evoque 2.2 eD4 150 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +50 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.2 eD4 150 hp?
Stage 1 on the Land-Rover Evoque 2.2 eD4 150 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Land-Rover Evoque 2.2 eD4 150 hp?
Stage 2 for the Land-Rover Evoque 2.2 eD4 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Land-Rover Evoque 2.2 eD4 150 hp run?
The control unit of the Land-Rover Evoque 2.2 eD4 150 hp is the Bosch EDC17CP42. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Land-Rover Evoque?
Stage 1 on the Land-Rover Evoque voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Land-Rover Evoque 2.2 eD4 150 hp done?
The full remap cycle for the Land-Rover Evoque — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Land-Rover Evoque?
The original Land-Rover Evoque ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Land-Rover Evoque 2.2 eD4 150 hp?
The cost of Stage 1 for the Land-Rover Evoque 2.2 eD4 150 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.