Land-Rover Discovery 3.0 TDV6 245 hp — Stage 1 file (+45 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Land-Rover Discovery 3.0 TDV6 245 hp ECU

Land-Rover Discovery (2008) 3.0 TDV6 245 hp — premium diesel engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 245 to 290 hp (+45 hp, +18%) and torque from 520 to 660 Nm (+140 Nm). ECU — Bosch EDC17CP11. Flashing method: OBD or Bench depending on the unit's protection. The 2008 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.

Land Rover specialises in premium off-roaders — the Range Rover, Discovery and Defender. The Range Rover is the flagship of the premium SUV segment and an iconic model for the brand. The Defender is an off-roader with a legendary reputation for capability. Ingenium Diesel is JLR's modern diesel range. DPF/SCR with AdBlue is standard on Euro-6 Jaguar diesels. High-output Jaguar diesels power the top F-Pace, XF and XJ variants.

The Jaguar community is a premium chip tuning niche in the UK and Europe. High-output Jaguars — the F-Type and F-Pace SVR — offer solid headroom for Stage 1.

Frequently asked questions

How many horsepower does the Land-Rover Discovery 3.0 TDV6 245 hp reach after a remap?

The Stage 1 gain for the Land-Rover Discovery 3.0 TDV6 245 hp is 45 hp (+18%) over the stock 245 hp, for a total of 290 hp. Torque rises from 520 to 660 Nm (+140 Nm).

What is Stage 1 chip tuning for the Land-Rover Discovery?

Stage 1 on the Land-Rover Discovery 3.0 TDV6 245 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +45 hp with no hardware changes.

What does Stage 1 give on the powerful Land-Rover Discovery 3.0 TDV6 245 hp?

The high-output Land-Rover Discovery 3.0 TDV6 245 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.

How does Stage 2 differ from Stage 1 on the Land-Rover Discovery 3.0 TDV6 245 hp?

Stage 2 on the Land-Rover Discovery 3.0 TDV6 245 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

What control unit does the Land-Rover Discovery 3.0 TDV6 245 hp run?

The control unit of the Land-Rover Discovery 3.0 TDV6 245 hp is the Bosch EDC17CP11. Before flashing, the engineer identifies the exact revision and selects the write method.

Does Stage 1 void the warranty on the Land-Rover Discovery?

Stage 1 on the Land-Rover Discovery voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Land-Rover Discovery 3.0 TDV6 245 hp done?

The full remap cycle for the Land-Rover Discovery — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Land-Rover Discovery?

The original Land-Rover Discovery ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Land-Rover Discovery 3.0 TDV6 245 hp?

The cost of Stage 1 for the Land-Rover Discovery 3.0 TDV6 245 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 01.09.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno