Land-Rover Defender 5.0 V8 supercharged 525 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Land-Rover Defender 5.0 V8 supercharged 525 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Land-Rover Defender 5.0 V8 supercharged 525 hp ECU
Land-Rover Defender (2024) 5.0 V8 supercharged 525 hp — premium petrol engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 525 to 575 hp (+50 hp, +10%) and torque from 625 to 700 Nm (+75 Nm). This engine ships with different ECU variants: Bosch MED17.8.31, Bosch MED17.8.32. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. A 2024 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Land Rover shares platforms and engines with Jaguar within JLR. Land Rover is a British manufacturer of premium off-roaders and SUVs, founded in 1948. Land Rover is part of Tata Motors via Jaguar Land Rover (JLR). The Jaguar V8 Supercharged is an iconic premium-segment engine. The supercharged Jaguar V8 has significant potential with hardware upgrades. Jaguar's petrol range spans turbocharged Ingenium units and supercharged V6/V8 engines.
Modern Jaguars use Tricore protection and often require a Bench read. The supercharged Jaguar V8 comfortably reaches Stage 2 with the right hardware. The Jaguar community is a premium chip tuning niche in the UK and Europe. The top Jaguar SVR engines (supercharged V8) mark the ceiling of British premium performance.
SVR models use a reinforced ZF 8HP. Jaguar uses the ZF 8HP, a premium 8-speed automatic.
Frequently asked questions
What power gain do you get after chip tuning the Land-Rover Defender 5.0 V8 supercharged 525 hp?
Stage 1 chip tuning on the Land-Rover Defender 5.0 V8 supercharged 525 hp boosts engine output by 50 hp: from 525 to 575 hp. Torque rises from 625 to 700 Nm (+75 Nm).
What changes in the Land-Rover Defender ECU after Stage 1?
Stage 1 on the Land-Rover Defender 5.0 V8 supercharged 525 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +50 hp with no hardware changes.
What does Stage 1 give on the top-spec Land-Rover Defender 5.0 V8 supercharged 525 hp?
On the top-spec Land-Rover Defender 5.0 V8 supercharged 525 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the Land-Rover Defender 5.0 V8 supercharged 525 hp?
Stage 2 for the Land-Rover Defender 5.0 V8 supercharged 525 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Land-Rover Defender 5.0 V8 supercharged 525 hp have?
The Land-Rover Defender 5.0 V8 supercharged 525 hp has 2 ECU variants: Bosch MED17.8.31, Bosch MED17.8.32. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does the ZF 8HPxx transmission need calibration after Stage 1 on the Land-Rover Defender?
Remapping the ZF 8HPxx gearbox is essential to fully unlock Stage 1 on the Land-Rover Defender 5.0 V8 supercharged 525 hp. Without a TCU update the factory torque cap will choke the torque gain and shifts will become noticeably softer.
Does Stage 1 void the warranty on the Land-Rover Defender?
Stage 1 on the Land-Rover Defender voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Land-Rover Defender 5.0 V8 supercharged 525 hp done?
The full remap cycle for the Land-Rover Defender — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Land-Rover Defender?
The original Land-Rover Defender ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Land-Rover Defender 5.0 V8 supercharged 525 hp?
The cost of Stage 1 for the Land-Rover Defender 5.0 V8 supercharged 525 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.