Lancia Ypsilon 1.3 Mjet 70 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Lancia Ypsilon 1.3 Mjet 70 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Lancia Ypsilon 1.3 Mjet 70 hp ECU
Lancia Ypsilon (2004) 1.3 Mjet 70 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Италия, 1906). Stage 1 chip tuning raises power from 70 to 95 hp (+25 hp, +36%) and torque from 190 to 240 Nm (+50 Nm). ECU — Marelli MJD6. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 2004 — the era of classic Common Rail without strong encryption.
Lancia has historically specialised in compact cars; in recent years only the Ypsilon remains, sold in Italy. Lancia shares platforms with Fiat within Stellantis. Lancia is part of the Stellantis group (formerly FCA). DPF/SCR with AdBlue is standard on Euro-6 Lancia diesels. Lancia uses Stellantis MultiJet diesels.
The Lancia community is a narrow niche, mostly in Italy. Low-output Lancia engines are city-segment units; Stage 1 is safe.
Frequently asked questions
How much does the power of the Lancia Ypsilon 1.3 Mjet 70 hp increase after Stage 1?
Stage 1 chip tuning on the Lancia Ypsilon 1.3 Mjet 70 hp boosts engine output by 25 hp: from 70 to 95 hp. Torque rises from 190 to 240 Nm (+50 Nm).
What changes in the Lancia Ypsilon ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Lancia Ypsilon with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Is Stage 1 worth doing on the base Lancia Ypsilon?
Yes, Stage 1 on the low-output Lancia Ypsilon 1.3 Mjet 70 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Lancia Ypsilon 1.3 Mjet 70 hp?
Stage 2 for the Lancia Ypsilon 1.3 Mjet 70 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Lancia Ypsilon 1.3 Mjet 70 hp use?
The Lancia Ypsilon 1.3 Mjet 70 hp is fitted with the Marelli MJD6 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Lancia Ypsilon remain valid after Stage 1?
After remapping the Lancia Ypsilon, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Lancia Ypsilon?
Reading and writing via OBD takes 25-30 minutes on the Lancia Ypsilon. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Lancia Ypsilon?
Before Stage 1 the original of the Lancia Ypsilon 1.3 Mjet 70 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Lancia Ypsilon 1.3 Mjet 70 hp cost?
The remap price for the Lancia Ypsilon 1.3 Mjet 70 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.