Lancia Voyager 3.6 V6 280 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Lancia Voyager 3.6 V6 280 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Lancia Voyager 3.6 V6 280 hp ECU
Lancia Voyager (2011) 3.6 V6 280 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Италия, 1906). Stage 1 chip tuning raises power from 280 to 290 hp (+10 hp, +4%) and torque from 342 to 360 Nm (+18 Nm). ECU — Siemens/Continental GPEC2. Flashing method: OBD or Bench depending on the unit's protection. The 2011 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Lancia HF is the brand's rally heritage, home to the legendary Stratos and Delta Integrale. Lancia is an Italian carmaker from Turin, founded in 1906. Lancia has historically specialised in compact cars; in recent years only the Ypsilon remains, sold in Italy. Lancia's petrol range consists of compacts based on Fiat platforms. Lancia shares ECUs with Fiat within Stellantis.
The Lancia community is a narrow niche, mostly in Italy. On older-generation Lancia models, Stage 1 is done via OBD without bench. High-output Lancia models are rare in the current range.
Frequently asked questions
How many horsepower does the Lancia Voyager 3.6 V6 280 hp reach after a remap?
After Stage 1 the power of the Lancia Voyager 3.6 V6 280 hp rises from 280 to 290 hp, a gain of 10 hp (+4%). Torque rises from 342 to 360 Nm (+18 Nm).
How does Stage 1 differ from stock on the Lancia Voyager?
Stage 1 is a software optimization of the factory ECU firmware of the Lancia Voyager with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +10 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Lancia Voyager?
The high-output Lancia Voyager 3.6 V6 280 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Lancia Voyager 3.6 V6 280 hp?
Stage 2 on the Lancia Voyager 3.6 V6 280 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Lancia Voyager 3.6 V6 280 hp use?
The Lancia Voyager 3.6 V6 280 hp is fitted with the Siemens/Continental GPEC2 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Lancia Voyager remain valid after Stage 1?
After remapping the Lancia Voyager, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Lancia Voyager?
Reading and writing via OBD takes 25-30 minutes on the Lancia Voyager. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Lancia Voyager?
Before Stage 1 the original of the Lancia Voyager 3.6 V6 280 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Lancia Voyager 3.6 V6 280 hp cost?
The remap price for the Lancia Voyager 3.6 V6 280 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.