Lancia Thesis 2.4 JTD 150 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Lancia Thesis 2.4 JTD 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Lancia Thesis 2.4 JTD 150 hp ECU
Lancia Thesis (2001) 2.4 JTD 150 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Италия, 1906). Stage 1 chip tuning raises power from 150 to 185 hp (+35 hp, +23%) and torque from 305 to 385 Nm (+80 Nm). ECU — Bosch EDC15C7. Flashing method: OBD or Bench depending on the unit's protection. The 2001 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Lancia shares platforms with Fiat within Stellantis. Lancia is part of the Stellantis group (formerly FCA). Lancia HF is the brand's rally heritage, home to the legendary Stratos and Delta Integrale. Lancia uses Stellantis MultiJet diesels. DPF/SCR with AdBlue is standard on Euro-6 Lancia diesels. On mid-range Lancia diesels, Stage 1 is noticeable in Nm.
The Lancia community is a narrow niche, mostly in Italy. Mid-range Lancia — Stage 1 while preserving engine life.
Frequently asked questions
What is the Stage 1 effect on the Lancia Thesis 2.4 JTD 150 hp?
After Stage 1 the power of the Lancia Thesis 2.4 JTD 150 hp rises from 150 to 185 hp, a gain of 35 hp (+23%). Torque rises from 305 to 385 Nm (+80 Nm).
How does Stage 1 differ from stock on the Lancia Thesis?
Stage 1 on the Lancia Thesis 2.4 JTD 150 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.4 JTD 150 hp?
Stage 1 on the Lancia Thesis 2.4 JTD 150 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Lancia Thesis 2.4 JTD 150 hp?
Stage 2 on the Lancia Thesis 2.4 JTD 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Lancia Thesis 2.4 JTD 150 hp run?
The control unit of the Lancia Thesis 2.4 JTD 150 hp is the Bosch EDC15C7. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Lancia Thesis?
Stage 1 on the Lancia Thesis voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Lancia Thesis 2.4 JTD 150 hp done?
The full remap cycle for the Lancia Thesis — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Lancia Thesis?
The original Lancia Thesis ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Lancia Thesis 2.4 JTD 150 hp?
The cost of Stage 1 for the Lancia Thesis 2.4 JTD 150 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.