Lancia Lybra 2.4 JTD 150 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Lancia Lybra 2.4 JTD 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Lancia Lybra 2.4 JTD 150 hp ECU
Lancia Lybra (1999) 2.4 JTD 150 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Италия, 1906). Stage 1 chip tuning raises power from 150 to 185 hp (+35 hp, +23%) and torque from 305 to 385 Nm (+80 Nm). ECU — Bosch EDC15C7. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 1999 — the era of classic Common Rail without strong encryption.
Lancia is an Italian carmaker from Turin, founded in 1906. Lancia has historically specialised in compact cars; in recent years only the Ypsilon remains, sold in Italy. Lancia shares platforms with Fiat within Stellantis. DPF/SCR with AdBlue is standard on Euro-6 Lancia diesels. On mid-range Lancia diesels, Stage 1 is noticeable in Nm. Lancia uses Stellantis MultiJet diesels.
The Lancia community is a narrow niche, mostly in Italy. Mid-range Lancia — Stage 1 while preserving engine life.
Frequently asked questions
How much horsepower does Stage 1 add for the Lancia Lybra 2.4 JTD 150 hp?
Stage 1 for the Lancia Lybra 2.4 JTD 150 hp adds +35 hp — power increases from 150 to 185 hp (+23%). Torque rises from 305 to 385 Nm (+80 Nm).
What does a Stage 1 remap of the Lancia Lybra 2.4 JTD 150 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Lancia Lybra with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Lancia Lybra 2.4 JTD 150 hp?
A remap of the Lancia Lybra 2.4 JTD 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Lancia Lybra 2.4 JTD 150 hp?
Stage 2 for the Lancia Lybra 2.4 JTD 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Lancia Lybra 2.4 JTD 150 hp use?
The Lancia Lybra 2.4 JTD 150 hp is fitted with the Bosch EDC15C7 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Lancia Lybra remain valid after Stage 1?
After remapping the Lancia Lybra, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Lancia Lybra?
Reading and writing via OBD takes 25-30 minutes on the Lancia Lybra. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Lancia Lybra?
Before Stage 1 the original of the Lancia Lybra 2.4 JTD 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Lancia Lybra 2.4 JTD 150 hp cost?
The remap price for the Lancia Lybra 2.4 JTD 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.