Lancia Lybra 2.4 JTD 140 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Lancia Lybra 2.4 JTD 140 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Lancia Lybra 2.4 JTD 140 hp ECU
Lancia Lybra (1999) 2.4 JTD 140 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Италия, 1906). Stage 1 chip tuning raises power from 140 to 175 hp (+35 hp, +25%) and torque from 304 to 379 Nm (+75 Nm). ECU — Bosch EDC15C7. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 1999 — the era of classic Common Rail without strong encryption.
Lancia HF is the brand's rally heritage, home to the legendary Stratos and Delta Integrale. Lancia is an Italian carmaker from Turin, founded in 1906. Lancia has historically specialised in compact cars; in recent years only the Ypsilon remains, sold in Italy. Lancia uses Stellantis MultiJet diesels. DPF/SCR with AdBlue is standard on Euro-6 Lancia diesels. On mid-range Lancia diesels, Stage 1 is noticeable in Nm.
The Lancia community is a narrow niche, mostly in Italy. Mid-range Lancia — Stage 1 while preserving engine life.
Frequently asked questions
How many horsepower does the Lancia Lybra 2.4 JTD 140 hp reach after a remap?
Stage 1 chip tuning on the Lancia Lybra 2.4 JTD 140 hp boosts engine output by 35 hp: from 140 to 175 hp. Torque rises from 304 to 379 Nm (+75 Nm).
What changes in the Lancia Lybra ECU after Stage 1?
Stage 1 on the Lancia Lybra 2.4 JTD 140 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.4 JTD 140 hp?
Stage 1 on the Lancia Lybra 2.4 JTD 140 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Lancia Lybra 2.4 JTD 140 hp?
Stage 2 for the Lancia Lybra 2.4 JTD 140 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Lancia Lybra 2.4 JTD 140 hp run?
The control unit of the Lancia Lybra 2.4 JTD 140 hp is the Bosch EDC15C7. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Lancia Lybra?
Stage 1 on the Lancia Lybra voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Lancia Lybra 2.4 JTD 140 hp done?
The full remap cycle for the Lancia Lybra — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Lancia Lybra?
The original Lancia Lybra ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Lancia Lybra 2.4 JTD 140 hp?
The cost of Stage 1 for the Lancia Lybra 2.4 JTD 140 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.