Lamborghini Urus 4.0 TFSI 666 hp — Stage 1 file (+34 hp)
hp
Stage 1 file for Lamborghini Urus 4.0 TFSI 666 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Lamborghini Urus 4.0 TFSI 666 hp ECU
Lamborghini Urus (2019) 4.0 TFSI 666 hp — luxury petrol engine of the passenger segment of the Volkswagen Group (VAG) через Audi group (Италия, 1963). Stage 1 chip tuning raises power from 666 to 700 hp (+34 hp, +5%) and torque from 850 to 1000 Nm (+150 Nm). ECU — Bosch MG1CS008. Flashing method: OBD or Bench depending on the unit's protection. The ZF AL552 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern petrol engine built in 2019 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Lamborghini is an Italian supercar manufacturer from Sant'Agata Bolognese, founded in 1963. Lamborghini has been part of the Volkswagen Group (VAG) via Audi since 1998. Lamborghini specialises in exclusive supercars and track models. Naturally aspirated supercars are a distinct calibration segment. Modern Lamborghini models are heavily encrypted and usually require Bench. Lamborghini's petrol range comprises high-output naturally aspirated and turbo engines.
The Lamborghini community is an ultra-premium chip tuning segment. With the right hardware, Lamborghini engines comfortably reach Stage 2. Protection on modern Lamborghini models is tight, so Bench is required. Top-tier Lamborghini engines sit at the power ceiling of the supercar segment. A Bench read is standard procedure on modern Lamborghinis.
The Urus uses the ZF 8HP, a premium 8-speed automatic. Top-tier Lamborghini models come with a reinforced gearbox. Lamborghini uses dual-clutch automated gearboxes.
Frequently asked questions
How many horsepower does the Lamborghini Urus 4.0 TFSI 666 hp reach after a remap?
After Stage 1 the power of the Lamborghini Urus 4.0 TFSI 666 hp rises from 666 to 700 hp, a gain of 34 hp (+5%). Torque rises from 850 to 1000 Nm (+150 Nm).
How does Stage 1 differ from stock on the Lamborghini Urus?
Stage 1 is a software optimization of the factory ECU firmware of the Lamborghini Urus with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +34 hp with no hardware changes.
Does Stage 1 make sense on the Lamborghini Urus 4.0 TFSI 666 hp with this much power?
Stage 1 for the Lamborghini Urus 4.0 TFSI 666 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Lamborghini Urus 4.0 TFSI 666 hp?
Stage 2 on the Lamborghini Urus 4.0 TFSI 666 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Lamborghini Urus 4.0 TFSI 666 hp use?
The Lamborghini Urus 4.0 TFSI 666 hp is fitted with the Bosch MG1CS008 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the ZF AL552 gearbox give on the Lamborghini Urus 4.0 TFSI 666 hp?
The ZF AL552 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Lamborghini Urus remain valid after Stage 1?
After remapping the Lamborghini Urus, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Lamborghini Urus?
Reading and writing via OBD takes 25-30 minutes on the Lamborghini Urus. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Lamborghini Urus?
Before Stage 1 the original of the Lamborghini Urus 4.0 TFSI 666 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Lamborghini Urus 4.0 TFSI 666 hp cost?
The remap price for the Lamborghini Urus 4.0 TFSI 666 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.