Lamborghini Huracan 5.2 V10 FSI Perf 640 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Lamborghini Huracan 5.2 V10 FSI Perf 640 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Lamborghini Huracan 5.2 V10 FSI Perf 640 hp ECU
Lamborghini Huracan (2014) 5.2 V10 FSI Perf 640 hp — luxury petrol engine of the passenger segment of the Volkswagen Group (VAG) через Audi group (Италия, 1963). Stage 1 chip tuning raises power from 640 to 655 hp (+15 hp, +2%) and torque from 565 to 605 Nm (+40 Nm). ECU — Bosch MED17.1.1. Flashing method: OBD or Bench depending on the unit's protection. The Siemens/Continental DL800 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2014 — a Tricore platform without strong protection; OBD access works.
The Lamborghini range comprises the Huracan, Aventador and Urus. The Lamborghini Urus is the first SUV in the range, sharing its platform with the Audi Q8 and Porsche Cayenne. The Lamborghini Huracan is a naturally aspirated supercar sharing its platform with the Audi R8. Naturally aspirated supercars are a distinct calibration segment. Lamborghini shares engines with Audi's top range within VAG. Top-tier Lamborghini engines have significant potential with a downpipe + intake.
With the right hardware, Lamborghini engines comfortably reach Stage 2. The Lamborghini community is an ultra-premium chip tuning segment. Within the VAG group, Lamborghini shares ECUs with Audi. A Bench read is standard procedure on modern Lamborghinis. Top-tier Lamborghini engines sit at the power ceiling of the supercar segment.
The Urus uses the ZF 8HP, a premium 8-speed automatic. Top-tier Lamborghini models come with a reinforced gearbox. Lamborghini uses dual-clutch automated gearboxes.
Frequently asked questions
What is the Stage 1 effect on the Lamborghini Huracan 5.2 V10 FSI Perf 640 hp?
Stage 1 chip tuning on the Lamborghini Huracan 5.2 V10 FSI Perf 640 hp boosts engine output by 15 hp: from 640 to 655 hp. Torque rises from 565 to 605 Nm (+40 Nm).
What changes in the Lamborghini Huracan ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Lamborghini Huracan with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +15 hp with no hardware changes.
Does Stage 1 make sense on the Lamborghini Huracan 5.2 V10 FSI Perf 640 hp with this much power?
On the top-spec Lamborghini Huracan 5.2 V10 FSI Perf 640 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Lamborghini Huracan 5.2 V10 FSI Perf 640 hp?
Stage 2 for the Lamborghini Huracan 5.2 V10 FSI Perf 640 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Lamborghini Huracan 5.2 V10 FSI Perf 640 hp use?
The Lamborghini Huracan 5.2 V10 FSI Perf 640 hp is fitted with the Bosch MED17.1.1 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the Siemens/Continental DL800 gearbox give on the Lamborghini Huracan 5.2 V10 FSI Perf 640 hp?
The Siemens/Continental DL800 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Lamborghini Huracan remain valid after Stage 1?
After remapping the Lamborghini Huracan, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Lamborghini Huracan?
Reading and writing via OBD takes 25-30 minutes on the Lamborghini Huracan. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Lamborghini Huracan?
Before Stage 1 the original of the Lamborghini Huracan 5.2 V10 FSI Perf 640 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Lamborghini Huracan 5.2 V10 FSI Perf 640 hp cost?
The remap price for the Lamborghini Huracan 5.2 V10 FSI Perf 640 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.