Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp ECU
Lamborghini Huracan (2014) 5.2 V10 FSI (2014) 610 hp — luxury petrol engine of the passenger segment of the Volkswagen Group (VAG) через Audi group (Италия, 1963). Stage 1 chip tuning raises power from 610 to 625 hp (+15 hp, +2%) and torque from 560 to 600 Nm (+40 Nm). ECU — Bosch MED17.1.1. Flashing method: OBD or Bench depending on the unit's protection. The Siemens/Continental DL800 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2014 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Lamborghini is an Italian supercar manufacturer from Sant'Agata Bolognese, founded in 1963. Lamborghini has been part of the Volkswagen Group (VAG) via Audi since 1998. Lamborghini specialises in exclusive supercars and track models. Naturally aspirated supercars are a distinct calibration segment. Lamborghini shares engines with Audi's top range within VAG. Top-tier Lamborghini engines have significant potential with a downpipe + intake.
With the right hardware, Lamborghini engines comfortably reach Stage 2. The Lamborghini community is an ultra-premium chip tuning segment. Within the VAG group, Lamborghini shares ECUs with Audi. Top-tier Lamborghini engines sit at the power ceiling of the supercar segment. A Bench read is standard procedure on modern Lamborghinis.
The Urus uses the ZF 8HP, a premium 8-speed automatic. Top-tier Lamborghini models come with a reinforced gearbox. Lamborghini uses dual-clutch automated gearboxes.
Frequently asked questions
What is the Stage 1 effect on the Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp?
The Stage 1 gain for the Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp is 15 hp (+2%) over the stock 610 hp, for a total of 625 hp. Torque rises from 560 to 600 Nm (+40 Nm).
What is Stage 1 chip tuning for the Lamborghini Huracan?
Stage 1 is a software optimization of the factory ECU firmware of the Lamborghini Huracan with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +15 hp with no hardware changes.
Does Stage 1 make sense on the Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp with this much power?
Stage 1 for the Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp?
Stage 2 on the Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp use?
The Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp is fitted with the Bosch MED17.1.1 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the Siemens/Continental DL800 gearbox give on the Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp?
The Siemens/Continental DL800 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Lamborghini Huracan remain valid after Stage 1?
After remapping the Lamborghini Huracan, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Lamborghini Huracan?
Reading and writing via OBD takes 25-30 minutes on the Lamborghini Huracan. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Lamborghini Huracan?
Before Stage 1 the original of the Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp cost?
The remap price for the Lamborghini Huracan 5.2 V10 FSI (2014) 610 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.