Kia Venga 1.4 CRDI 75 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Kia Venga 1.4 CRDI 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Venga 1.4 CRDI 75 hp ECU
Kia Venga (2009) 1.4 CRDI 75 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 75 to 95 hp (+20 hp, +27%) and torque from 220 to 270 Nm (+50 Nm). ECU — Delphi DCM3.7AP. Flashing method: OBD or Bench depending on the unit's protection. The 2009 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Kia is a Korean carmaker, part of the Hyundai Motor Group. Kia is positioned alongside Hyundai, with an emphasis on styling and a sporty character. The Stinger is Kia's performance saloon with a turbo V6. Low-output Hyundai diesels are city units, and Stage 1 is safe.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. Low-output Hyundai engines are city units, and Stage 1 is safe. On naturally aspirated Hyundai engines, the main effect is on throttle response.
Frequently asked questions
What is the Stage 1 effect on the Kia Venga 1.4 CRDI 75 hp?
The Stage 1 gain for the Kia Venga 1.4 CRDI 75 hp is 20 hp (+27%) over the stock 75 hp, for a total of 95 hp. Torque rises from 220 to 270 Nm (+50 Nm).
What is Stage 1 chip tuning for the Kia Venga?
Stage 1 is a software optimization of the factory ECU firmware of the Kia Venga with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Is Stage 1 worth doing on the base Kia Venga?
Stage 1 on the base Kia Venga is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Kia Venga 1.4 CRDI 75 hp?
Stage 2 on the Kia Venga 1.4 CRDI 75 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Kia Venga 1.4 CRDI 75 hp use?
The Kia Venga 1.4 CRDI 75 hp is fitted with the Delphi DCM3.7AP ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Kia Venga remain valid after Stage 1?
After remapping the Kia Venga, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Kia Venga?
Reading and writing via OBD takes 25-30 minutes on the Kia Venga. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Kia Venga?
Before Stage 1 the original of the Kia Venga 1.4 CRDI 75 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Kia Venga 1.4 CRDI 75 hp cost?
The remap price for the Kia Venga 1.4 CRDI 75 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.