Kia Stonic (KX1) 1.0 T-GDI 48v 100 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Kia Stonic (KX1) 1.0 T-GDI 48v 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Stonic (KX1) 1.0 T-GDI 48v 100 hp ECU
Kia Stonic (KX1) (2017) 1.0 T-GDI 48v 100 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 100 to 140 hp (+40 hp, +40%) and torque from 172 to 230 Nm (+58 Nm). ECU — Kefico CPEGP3.20.1. Flashing method: OBD or Bench depending on the unit's protection. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The Stinger is Kia's performance saloon with a turbo V6. The EV6 is Kia's flagship electric crossover, built on the E-GMP platform. GT is Kia's sporty trim package. T-GDI is Hyundai's badge for its direct-injection turbo petrol engines. The Hyundai N-series are sporting turbo engines for the i30 N, Elantra N and Kona N. Hyundai turbo petrol engines deliver a noticeable gain with Stage 1.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on the Hyundai T-GDI delivers a noticeable gain. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
How much horsepower does Stage 1 add for the Kia Stonic (KX1) 1.0 T-GDI 48v 100 hp?
After Stage 1 the power of the Kia Stonic (KX1) 1.0 T-GDI 48v 100 hp rises from 100 to 140 hp, a gain of 40 hp (+40%). Torque rises from 172 to 230 Nm (+58 Nm).
How does Stage 1 differ from stock on the Kia Stonic (KX1)?
Stage 1 on the Kia Stonic (KX1) 1.0 T-GDI 48v 100 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +40 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.0 T-GDI 48v 100 hp?
Stage 1 on the Kia Stonic (KX1) 1.0 T-GDI 48v 100 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Kia Stonic (KX1) 1.0 T-GDI 48v 100 hp?
Stage 2 on the Kia Stonic (KX1) 1.0 T-GDI 48v 100 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Kia Stonic (KX1) 1.0 T-GDI 48v 100 hp run?
The control unit of the Kia Stonic (KX1) 1.0 T-GDI 48v 100 hp is the Kefico CPEGP3.20.1. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Kia Stonic (KX1)?
Stage 1 on the Kia Stonic (KX1) voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Kia Stonic (KX1) 1.0 T-GDI 48v 100 hp done?
The full remap cycle for the Kia Stonic (KX1) — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Kia Stonic (KX1)?
The original Kia Stonic (KX1) ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Kia Stonic (KX1) 1.0 T-GDI 48v 100 hp?
The cost of Stage 1 for the Kia Stonic (KX1) 1.0 T-GDI 48v 100 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.