Kia Sportage 1.8i 150 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Kia Sportage 1.8i 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Sportage 1.8i 150 hp ECU
Kia Sportage (2010) 1.8i 150 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 150 to 160 hp (+10 hp, +7%) and torque from 178 to 188 Nm (+10 Nm). ECU — Siemens/Continental SIM2K-241. Flashing method: OBD or Bench depending on the unit's protection. The 2010 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The Stinger is Kia's performance saloon with a turbo V6. The EV6 is Kia's flagship electric crossover, built on the E-GMP platform. GT is Kia's sporty trim package. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1. T-GDI is Hyundai's badge for its direct-injection turbo petrol engines. The Hyundai N-series are sporting turbo engines for the i30 N, Elantra N and Kona N.
On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
How many horsepower does the Kia Sportage 1.8i 150 hp reach after a remap?
The Stage 1 gain for the Kia Sportage 1.8i 150 hp is 10 hp (+7%) over the stock 150 hp, for a total of 160 hp. Torque rises from 178 to 188 Nm (+10 Nm).
What is Stage 1 chip tuning for the Kia Sportage?
Stage 1 on the Kia Sportage 1.8i 150 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +10 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.8i 150 hp?
Stage 1 on the Kia Sportage 1.8i 150 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Kia Sportage 1.8i 150 hp?
Stage 2 on the Kia Sportage 1.8i 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Kia Sportage 1.8i 150 hp run?
The control unit of the Kia Sportage 1.8i 150 hp is the Siemens/Continental SIM2K-241. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Kia Sportage?
Stage 1 on the Kia Sportage voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Kia Sportage 1.8i 150 hp done?
The full remap cycle for the Kia Sportage — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Kia Sportage?
The original Kia Sportage ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Kia Sportage 1.8i 150 hp?
The cost of Stage 1 for the Kia Sportage 1.8i 150 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.