Kia Sportage 1.7 CRDI EU5 115 hp — Stage 1 file (+35 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Kia Sportage 1.7 CRDI EU5 115 hp ECU

Kia Sportage (2010) 1.7 CRDI EU5 115 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 115 to 150 hp (+35 hp, +30%) and torque from 260 to 310 Nm (+50 Nm). This engine ships with different ECU variants: Bosch EDC17C08, Bosch EDC17C53, Bosch EDC17CP14. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.

The Stinger is Kia's performance saloon with a turbo V6. The EV6 is Kia's flagship electric crossover, built on the E-GMP platform. GT is Kia's sporty trim package. Mid-range Hyundai diesels are a mainstream chip tuning subject.

The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.

Frequently asked questions

What is the Stage 1 effect on the Kia Sportage 1.7 CRDI EU5 115 hp?

After Stage 1 the power of the Kia Sportage 1.7 CRDI EU5 115 hp rises from 115 to 150 hp, a gain of 35 hp (+30%). Torque rises from 260 to 310 Nm (+50 Nm).

How does Stage 1 differ from stock on the Kia Sportage?

Stage 1 on the Kia Sportage 1.7 CRDI EU5 115 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.

Is a Stage 1 remap safe for the 1.7 CRDI EU5 115 hp?

Stage 1 on the Kia Sportage 1.7 CRDI EU5 115 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.

How does Stage 2 differ from Stage 1 on the Kia Sportage 1.7 CRDI EU5 115 hp?

Stage 2 on the Kia Sportage 1.7 CRDI EU5 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

How many ECU variants does the Kia Sportage 1.7 CRDI EU5 115 hp have?

The Kia Sportage 1.7 CRDI EU5 115 hp has 3 ECU variants: Bosch EDC17C08, Bosch EDC17C53, Bosch EDC17CP14. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.

Does Stage 1 void the warranty on the Kia Sportage?

Stage 1 on the Kia Sportage voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Kia Sportage 1.7 CRDI EU5 115 hp done?

The full remap cycle for the Kia Sportage — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Kia Sportage?

The original Kia Sportage ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Kia Sportage 1.7 CRDI EU5 115 hp?

The cost of Stage 1 for the Kia Sportage 1.7 CRDI EU5 115 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno