Kia Sorento 2.2 CRDI EU6 200 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Kia Sorento 2.2 CRDI EU6 200 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Sorento 2.2 CRDI EU6 200 hp ECU
Kia Sorento (2014) 2.2 CRDI EU6 200 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 200 to 220 hp (+20 hp, +10%) and torque from 441 to 521 Nm (+80 Nm). ECU — Bosch EDC17C57. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 2014 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Kia is a Korean carmaker, part of the Hyundai Motor Group. Kia is positioned alongside Hyundai, with an emphasis on styling and a sporty character. The Stinger is Kia's performance saloon with a turbo V6. Mid-generation diesel models use standard OBD read/write.
On older-generation Hyundais, Stage 1 goes in over OBD without Bench. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. High-output Hyundais are the N-series and Santa Fe, with solid headroom for Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Kia Sorento 2.2 CRDI EU6 200 hp?
The Stage 1 gain for the Kia Sorento 2.2 CRDI EU6 200 hp is 20 hp (+10%) over the stock 200 hp, for a total of 220 hp. Torque rises from 441 to 521 Nm (+80 Nm).
What is Stage 1 chip tuning for the Kia Sorento?
Stage 1 is a software optimization of the factory ECU firmware of the Kia Sorento with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Kia Sorento?
The high-output Kia Sorento 2.2 CRDI EU6 200 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Kia Sorento 2.2 CRDI EU6 200 hp?
Stage 2 on the Kia Sorento 2.2 CRDI EU6 200 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Kia Sorento 2.2 CRDI EU6 200 hp use?
The Kia Sorento 2.2 CRDI EU6 200 hp is fitted with the Bosch EDC17C57 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Kia Sorento remain valid after Stage 1?
After remapping the Kia Sorento, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Kia Sorento?
Reading and writing via OBD takes 25-30 minutes on the Kia Sorento. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Kia Sorento?
Before Stage 1 the original of the Kia Sorento 2.2 CRDI EU6 200 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Kia Sorento 2.2 CRDI EU6 200 hp cost?
The remap price for the Kia Sorento 2.2 CRDI EU6 200 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.