Kia Seltos 1.6 T-GDI 198 hp — Stage 1 file (+32 hp)
hp
Stage 1 file for Kia Seltos 1.6 T-GDI 198 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Seltos 1.6 T-GDI 198 hp ECU
Kia Seltos (2019) 1.6 T-GDI 198 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 198 to 230 hp (+32 hp, +16%) and torque from 265 to 330 Nm (+65 Nm). ECU — Kefico CPEGD3.20.1. Flashing method: OBD or Bench depending on the unit's protection. A modern petrol engine built in 2019 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Kia is a Korean carmaker, part of the Hyundai Motor Group. Kia is positioned alongside Hyundai, with an emphasis on styling and a sporty character. The Stinger is Kia's performance saloon with a turbo V6. Hyundai turbo petrol engines deliver a noticeable gain with Stage 1. Modern Hyundai N engines usually require Bench. T-GDI is Hyundai's badge for its direct-injection turbo petrol engines.
Protection on modern Hyundai N models is tough and requires Bench. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
How much horsepower does Stage 1 add for the Kia Seltos 1.6 T-GDI 198 hp?
The Stage 1 gain for the Kia Seltos 1.6 T-GDI 198 hp is 32 hp (+16%) over the stock 198 hp, for a total of 230 hp. Torque rises from 265 to 330 Nm (+65 Nm).
What is Stage 1 chip tuning for the Kia Seltos?
Stage 1 is a software optimization of the factory ECU firmware of the Kia Seltos with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +32 hp with no hardware changes.
What is the risk of Stage 1 on the Kia Seltos 1.6 T-GDI 198 hp?
A remap of the Kia Seltos 1.6 T-GDI 198 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Kia Seltos 1.6 T-GDI 198 hp?
Stage 2 on the Kia Seltos 1.6 T-GDI 198 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Kia Seltos 1.6 T-GDI 198 hp use?
The Kia Seltos 1.6 T-GDI 198 hp is fitted with the Kefico CPEGD3.20.1 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Kia Seltos remain valid after Stage 1?
After remapping the Kia Seltos, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Kia Seltos?
Reading and writing via OBD takes 25-30 minutes on the Kia Seltos. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Kia Seltos?
Before Stage 1 the original of the Kia Seltos 1.6 T-GDI 198 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Kia Seltos 1.6 T-GDI 198 hp cost?
The remap price for the Kia Seltos 1.6 T-GDI 198 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.