Kia Rio 1.2 MPI 84 hp — Stage 1 file (+6 hp)
hp
Stage 1 file for Kia Rio 1.2 MPI 84 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Rio 1.2 MPI 84 hp ECU
Kia Rio (2017) 1.2 MPI 84 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 84 to 90 hp (+6 hp, +7%) and torque from 124 to 130 Nm (+6 Nm). This engine ships with different ECU variants: Bosch ME17.9.11.1, Bosch ME17.9.21, Bosch ME17.9.21.1. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 9 configurations · 3 ECU variants. A petrol engine built in 2017 — a Tricore platform without strong protection; OBD access works.
Kia is positioned alongside Hyundai, with an emphasis on styling and a sporty character. The Stinger is Kia's performance saloon with a turbo V6. The EV6 is Kia's flagship electric crossover, built on the E-GMP platform. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1. T-GDI is Hyundai's badge for its direct-injection turbo petrol engines. The Hyundai N-series are sporting turbo engines for the i30 N, Elantra N and Kona N.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. On naturally aspirated Hyundai engines, the main effect is on throttle response. Low-output Hyundai engines are city units, and Stage 1 is safe.
Frequently asked questions
How many horsepower does the Kia Rio 1.2 MPI 84 hp reach after a remap?
Stage 1 for the Kia Rio 1.2 MPI 84 hp adds +6 hp — power increases from 84 to 90 hp (+7%). Torque rises from 124 to 130 Nm (+6 Nm).
What does a Stage 1 remap of the Kia Rio 1.2 MPI 84 hp include?
Stage 1 chip tuning of the Kia Rio is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +6 hp with no hardware changes.
What does chip tuning give on the low-output Kia Rio 1.2 MPI 84 hp?
Yes, Stage 1 on the low-output Kia Rio 1.2 MPI 84 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How much does Stage 2 add on the Kia Rio?
Stage 2 for the Kia Rio 1.2 MPI 84 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Kia Rio 1.2 MPI 84 hp?
The Kia Rio 1.2 MPI 84 hp was fitted with different ECUs depending on the year and trim: Bosch ME17.9.11.1, Bosch ME17.9.21, Bosch ME17.9.21.1. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Kia Rio warranty after chip tuning?
The factory warranty of the Kia Rio does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Kia Rio take?
On the Kia Rio 1.2 MPI 84 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Kia Rio?
Yes, the original ECU firmware of the Kia Rio 1.2 MPI 84 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Kia Rio?
Stage 1 for the Kia Rio 1.2 MPI 84 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.