Kia Rio 1.1 CRDI EU6 75 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Kia Rio 1.1 CRDI EU6 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Rio 1.1 CRDI EU6 75 hp ECU
Kia Rio (2014) 1.1 CRDI EU6 75 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 75 to 100 hp (+25 hp, +33%) and torque from 180 to 210 Nm (+30 Nm). ECU — Delphi DCM6.2AP. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2014 — the Tricore ECU era; OBD flash works on most production revisions.
Kia shares platforms and engines with Hyundai and Genesis. Kia is a Korean carmaker, part of the Hyundai Motor Group. Kia is positioned alongside Hyundai, with an emphasis on styling and a sporty character. The Hyundai community in Eastern Europe and the CIS does a large volume of diesel chip tuning.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. On naturally aspirated Hyundai engines, the main effect is on throttle response. Low-output Hyundai engines are city units, and Stage 1 is safe.
Frequently asked questions
What power gain do you get after chip tuning the Kia Rio 1.1 CRDI EU6 75 hp?
Stage 1 for the Kia Rio 1.1 CRDI EU6 75 hp adds +25 hp — power increases from 75 to 100 hp (+33%). Torque rises from 180 to 210 Nm (+30 Nm).
What does a Stage 1 remap of the Kia Rio 1.1 CRDI EU6 75 hp include?
Stage 1 on the Kia Rio 1.1 CRDI EU6 75 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is Stage 1 safe for the low-output Kia Rio 1.1 CRDI EU6 75 hp?
Yes, Stage 1 on the low-output Kia Rio 1.1 CRDI EU6 75 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How does Stage 2 differ from Stage 1 on the Kia Rio 1.1 CRDI EU6 75 hp?
Stage 2 for the Kia Rio 1.1 CRDI EU6 75 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Kia Rio 1.1 CRDI EU6 75 hp run?
The control unit of the Kia Rio 1.1 CRDI EU6 75 hp is the Delphi DCM6.2AP. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Kia Rio?
Stage 1 on the Kia Rio voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Kia Rio 1.1 CRDI EU6 75 hp done?
The full remap cycle for the Kia Rio — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Kia Rio?
The original Kia Rio ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Kia Rio 1.1 CRDI EU6 75 hp?
The cost of Stage 1 for the Kia Rio 1.1 CRDI EU6 75 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.