Kia ProCeed 1.6 CRDI EU6 136 hp — Stage 1 file (+24 hp)
hp
Stage 1 file for Kia ProCeed 1.6 CRDI EU6 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia ProCeed 1.6 CRDI EU6 136 hp ECU
Kia ProCeed (2019) 1.6 CRDI EU6 136 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 136 to 160 hp (+24 hp, +18%) and torque from 280 to 340 Nm (+60 Nm). ECU — Bosch EDC17C57. Flashing method: OBD or Bench depending on the unit's protection. A 2019 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
The EV6 is Kia's flagship electric crossover, built on the E-GMP platform. GT is Kia's sporty trim package. Kia shares platforms and engines with Hyundai and Genesis. DPF/SCR with AdBlue is standard on Euro-6 Hyundai diesels.
Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. Protection on modern Hyundai N models is tough and requires Bench. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe.
Frequently asked questions
How much does the power of the Kia ProCeed 1.6 CRDI EU6 136 hp increase after Stage 1?
Stage 1 for the Kia ProCeed 1.6 CRDI EU6 136 hp adds +24 hp — power increases from 136 to 160 hp (+18%). Torque rises from 280 to 340 Nm (+60 Nm).
What does a Stage 1 remap of the Kia ProCeed 1.6 CRDI EU6 136 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Kia ProCeed with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +24 hp with no hardware changes.
What is the risk of Stage 1 on the Kia ProCeed 1.6 CRDI EU6 136 hp?
A remap of the Kia ProCeed 1.6 CRDI EU6 136 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Kia ProCeed 1.6 CRDI EU6 136 hp?
Stage 2 for the Kia ProCeed 1.6 CRDI EU6 136 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Kia ProCeed 1.6 CRDI EU6 136 hp use?
The Kia ProCeed 1.6 CRDI EU6 136 hp is fitted with the Bosch EDC17C57 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Kia ProCeed remain valid after Stage 1?
After remapping the Kia ProCeed, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Kia ProCeed?
Reading and writing via OBD takes 25-30 minutes on the Kia ProCeed. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Kia ProCeed?
Before Stage 1 the original of the Kia ProCeed 1.6 CRDI EU6 136 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Kia ProCeed 1.6 CRDI EU6 136 hp cost?
The remap price for the Kia ProCeed 1.6 CRDI EU6 136 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.