Kia Cerato (K3) - Forte 2.0 MPI 152 hp — Stage 1 file (+7 hp)
hp
Stage 1 file for Kia Cerato (K3) - Forte 2.0 MPI 152 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Cerato (K3) - Forte 2.0 MPI 152 hp ECU
Kia Cerato (K3) - Forte (2018) 2.0 MPI 152 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 152 to 159 hp (+7 hp, +5%) and torque from 192 to 200 Nm (+8 Nm). A modern petrol engine built in 2018 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Kia is a Korean carmaker, part of the Hyundai Motor Group. Kia is positioned alongside Hyundai, with an emphasis on styling and a sporty character. The Stinger is Kia's performance saloon with a turbo V6. Hyundai turbo petrol engines deliver a noticeable gain with Stage 1. Modern Hyundai N engines usually require Bench. T-GDI is Hyundai's badge for its direct-injection turbo petrol engines.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on the Hyundai T-GDI delivers a noticeable gain. Protection on modern Hyundai N models is tough and requires Bench. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
How many horsepower does the Kia Cerato (K3) - Forte 2.0 MPI 152 hp reach after a remap?
After Stage 1 the power of the Kia Cerato (K3) - Forte 2.0 MPI 152 hp rises from 152 to 159 hp, a gain of 7 hp (+5%). Torque rises from 192 to 200 Nm (+8 Nm).
How does Stage 1 differ from stock on the Kia Cerato (K3) - Forte?
Stage 1 is a software optimization of the factory ECU firmware of the Kia Cerato (K3) - Forte with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +7 hp with no hardware changes.
What is the risk of Stage 1 on the Kia Cerato (K3) - Forte 2.0 MPI 152 hp?
A remap of the Kia Cerato (K3) - Forte 2.0 MPI 152 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Kia Cerato (K3) - Forte 2.0 MPI 152 hp?
Stage 2 on the Kia Cerato (K3) - Forte 2.0 MPI 152 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Kia Cerato (K3) - Forte remain valid after Stage 1?
After remapping the Kia Cerato (K3) - Forte, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Kia Cerato (K3) - Forte?
Reading and writing via OBD takes 25-30 minutes on the Kia Cerato (K3) - Forte. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Kia Cerato (K3) - Forte?
Before Stage 1 the original of the Kia Cerato (K3) - Forte 2.0 MPI 152 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Kia Cerato (K3) - Forte 2.0 MPI 152 hp cost?
The remap price for the Kia Cerato (K3) - Forte 2.0 MPI 152 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.