Kia Cerato (K3) - Forte 1.6i (kia) 125 hp — Stage 1 file (+5 hp)
hp
Stage 1 file for Kia Cerato (K3) - Forte 1.6i (kia) 125 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Cerato (K3) - Forte 1.6i (kia) 125 hp ECU
Kia Cerato (K3) - Forte (2018) 1.6i (kia) 125 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 125 to 130 hp (+5 hp, +4%) and torque from 157 to 165 Nm (+8 Nm). ECU — Bosch MEG17.9.21. Flashing method: OBD or Bench depending on the unit's protection. A 2018 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
The EV6 is Kia's flagship electric crossover, built on the E-GMP platform. GT is Kia's sporty trim package. Kia shares platforms and engines with Hyundai and Genesis. Smartstream is Hyundai's modern engine range with an emphasis on economy. The Hyundai N-series are sporting turbo engines for the i30 N, Elantra N and Kona N. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on the Hyundai T-GDI delivers a noticeable gain. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe.
Frequently asked questions
How many horsepower does the Kia Cerato (K3) - Forte 1.6i (kia) 125 hp reach after a remap?
Stage 1 chip tuning on the Kia Cerato (K3) - Forte 1.6i (kia) 125 hp boosts engine output by 5 hp: from 125 to 130 hp. Torque rises from 157 to 165 Nm (+8 Nm).
What changes in the Kia Cerato (K3) - Forte ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Kia Cerato (K3) - Forte with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +5 hp with no hardware changes.
What is the risk of Stage 1 on the Kia Cerato (K3) - Forte 1.6i (kia) 125 hp?
A remap of the Kia Cerato (K3) - Forte 1.6i (kia) 125 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Kia Cerato (K3) - Forte 1.6i (kia) 125 hp?
Stage 2 for the Kia Cerato (K3) - Forte 1.6i (kia) 125 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Kia Cerato (K3) - Forte 1.6i (kia) 125 hp use?
The Kia Cerato (K3) - Forte 1.6i (kia) 125 hp is fitted with the Bosch MEG17.9.21 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Kia Cerato (K3) - Forte remain valid after Stage 1?
After remapping the Kia Cerato (K3) - Forte, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Kia Cerato (K3) - Forte?
Reading and writing via OBD takes 25-30 minutes on the Kia Cerato (K3) - Forte. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Kia Cerato (K3) - Forte?
Before Stage 1 the original of the Kia Cerato (K3) - Forte 1.6i (kia) 125 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Kia Cerato (K3) - Forte 1.6i (kia) 125 hp cost?
The remap price for the Kia Cerato (K3) - Forte 1.6i (kia) 125 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.