Kia Ceed 1.6 GDI PHEV 205 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Kia Ceed 1.6 GDI PHEV 205 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Ceed 1.6 GDI PHEV 205 hp ECU
Kia Ceed (2018) 1.6 GDI PHEV 205 hp — mass-market hybrid engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 205 to 230 hp (+25 hp, +12%) and torque from 265 to 300 Nm (+35 Nm). This engine ships with different ECU variants: Kefico CPEGD2.20.1, Kefico CPEGD2.20.2, Kefico CPEGD2.20.3, Kefico CPEGD2.20.4, Kefico CPEGD2.20.x. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 5 configurations · 5 ECU variants.
Kia is a Korean carmaker, part of the Hyundai Motor Group. Kia is positioned alongside Hyundai, with an emphasis on styling and a sporty character. The Stinger is Kia's performance saloon with a turbo V6. The NEXO is Hyundai's hydrogen fuel-cell crossover. IONIQ is a dedicated full-EV Hyundai line. Hyundai PHEV variants combine a T-GDI engine with an electric motor.
Protection on modern Hyundai N models is tough and requires Bench. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. High-output Hyundais are the N-series and Santa Fe, with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Kia Ceed 1.6 GDI PHEV 205 hp reach after a remap?
The Stage 1 gain for the Kia Ceed 1.6 GDI PHEV 205 hp is 25 hp (+12%) over the stock 205 hp, for a total of 230 hp. Torque rises from 265 to 300 Nm (+35 Nm).
What is Stage 1 chip tuning for the Kia Ceed?
Stage 1 is a software optimization of the factory ECU firmware of the Kia Ceed with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Kia Ceed?
The high-output Kia Ceed 1.6 GDI PHEV 205 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Kia Ceed 1.6 GDI PHEV 205 hp?
Stage 2 on the Kia Ceed 1.6 GDI PHEV 205 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Kia Ceed 1.6 GDI PHEV 205 hp built with?
The Kia Ceed 1.6 GDI PHEV 205 hp comes with 5 ECU variants: Kefico CPEGD2.20.1, Kefico CPEGD2.20.2, Kefico CPEGD2.20.3, Kefico CPEGD2.20.4, Kefico CPEGD2.20.x. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Kia Ceed remain valid after Stage 1?
After remapping the Kia Ceed, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Kia Ceed?
Reading and writing via OBD takes 25-30 minutes on the Kia Ceed. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Kia Ceed?
Before Stage 1 the original of the Kia Ceed 1.6 GDI PHEV 205 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Kia Ceed 1.6 GDI PHEV 205 hp cost?
The remap price for the Kia Ceed 1.6 GDI PHEV 205 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.