Kia Ceed 1.6 CRDI EU6 136 hp — Stage 1 file (+24 hp)
hp
Stage 1 file for Kia Ceed 1.6 CRDI EU6 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Ceed 1.6 CRDI EU6 136 hp ECU
Kia Ceed (2018) 1.6 CRDI EU6 136 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 136 to 160 hp (+24 hp, +18%) and torque from 280 to 340 Nm (+60 Nm). ECU — Bosch EDC17C57. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. A modern diesel built in 2018 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Kia is a Korean carmaker, part of the Hyundai Motor Group. Kia is positioned alongside Hyundai, with an emphasis on styling and a sporty character. The Stinger is Kia's performance saloon with a turbo V6. The Hyundai diesel range is shared with Kia and Genesis within the group.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. Protection on modern Hyundai N models is tough and requires Bench. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
How much does the power of the Kia Ceed 1.6 CRDI EU6 136 hp increase after Stage 1?
After Stage 1 the power of the Kia Ceed 1.6 CRDI EU6 136 hp rises from 136 to 160 hp, a gain of 24 hp (+18%). Torque rises from 280 to 340 Nm (+60 Nm).
How does Stage 1 differ from stock on the Kia Ceed?
Stage 1 is a software optimization of the factory ECU firmware of the Kia Ceed with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +24 hp with no hardware changes.
What is the risk of Stage 1 on the Kia Ceed 1.6 CRDI EU6 136 hp?
A remap of the Kia Ceed 1.6 CRDI EU6 136 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Kia Ceed 1.6 CRDI EU6 136 hp?
Stage 2 on the Kia Ceed 1.6 CRDI EU6 136 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Kia Ceed 1.6 CRDI EU6 136 hp use?
The Kia Ceed 1.6 CRDI EU6 136 hp is fitted with the Bosch EDC17C57 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Kia Ceed remain valid after Stage 1?
After remapping the Kia Ceed, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Kia Ceed?
Reading and writing via OBD takes 25-30 minutes on the Kia Ceed. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Kia Ceed?
Before Stage 1 the original of the Kia Ceed 1.6 CRDI EU6 136 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Kia Ceed 1.6 CRDI EU6 136 hp cost?
The remap price for the Kia Ceed 1.6 CRDI EU6 136 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.