Kia Ceed 1.6 CRDI EU6 110 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Kia Ceed 1.6 CRDI EU6 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Ceed 1.6 CRDI EU6 110 hp ECU
Kia Ceed (2015) 1.6 CRDI EU6 110 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 110 to 145 hp (+35 hp, +32%) and torque from 260 to 320 Nm (+60 Nm). ECU — Bosch EDC17C57. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. A diesel built in 2015 — the Tricore ECU era; OBD flash works on most production revisions.
The EV6 is Kia's flagship electric crossover, built on the E-GMP platform. GT is Kia's sporty trim package. Kia shares platforms and engines with Hyundai and Genesis. CRDi is Hyundai's badge for its direct-injection turbo diesels.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe.
Frequently asked questions
What is the Stage 1 effect on the Kia Ceed 1.6 CRDI EU6 110 hp?
Stage 1 chip tuning on the Kia Ceed 1.6 CRDI EU6 110 hp boosts engine output by 35 hp: from 110 to 145 hp. Torque rises from 260 to 320 Nm (+60 Nm).
What changes in the Kia Ceed ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Kia Ceed with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Kia Ceed 1.6 CRDI EU6 110 hp?
A remap of the Kia Ceed 1.6 CRDI EU6 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Kia Ceed 1.6 CRDI EU6 110 hp?
Stage 2 for the Kia Ceed 1.6 CRDI EU6 110 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Kia Ceed 1.6 CRDI EU6 110 hp use?
The Kia Ceed 1.6 CRDI EU6 110 hp is fitted with the Bosch EDC17C57 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Kia Ceed remain valid after Stage 1?
After remapping the Kia Ceed, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Kia Ceed?
Reading and writing via OBD takes 25-30 minutes on the Kia Ceed. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Kia Ceed?
Before Stage 1 the original of the Kia Ceed 1.6 CRDI EU6 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Kia Ceed 1.6 CRDI EU6 110 hp cost?
The remap price for the Kia Ceed 1.6 CRDI EU6 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.