Kia Ceed 1.6 CRDI EU5 126 hp — Stage 1 file (+22 hp)
hp
Stage 1 file for Kia Ceed 1.6 CRDI EU5 126 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Ceed 1.6 CRDI EU5 126 hp ECU
Kia Ceed (2012) 1.6 CRDI EU5 126 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 126 to 148 hp (+22 hp, +17%) and torque from 260 to 320 Nm (+60 Nm). This engine ships with different ECU variants: Bosch EDC17C08, Bosch EDC17C53, Bosch EDC17CP14. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A diesel built in 2012 — the Tricore ECU era; OBD flash works on most production revisions.
The EV6 is Kia's flagship electric crossover, built on the E-GMP platform. GT is Kia's sporty trim package. Kia shares platforms and engines with Hyundai and Genesis. CRDi is Hyundai's badge for its direct-injection turbo diesels.
Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe.
Frequently asked questions
What is the Stage 1 effect on the Kia Ceed 1.6 CRDI EU5 126 hp?
Stage 1 for the Kia Ceed 1.6 CRDI EU5 126 hp adds +22 hp — power increases from 126 to 148 hp (+17%). Torque rises from 260 to 320 Nm (+60 Nm).
What does a Stage 1 remap of the Kia Ceed 1.6 CRDI EU5 126 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Kia Ceed with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +22 hp with no hardware changes.
What is the risk of Stage 1 on the Kia Ceed 1.6 CRDI EU5 126 hp?
A remap of the Kia Ceed 1.6 CRDI EU5 126 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Kia Ceed 1.6 CRDI EU5 126 hp?
Stage 2 for the Kia Ceed 1.6 CRDI EU5 126 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Kia Ceed 1.6 CRDI EU5 126 hp built with?
The Kia Ceed 1.6 CRDI EU5 126 hp comes with 3 ECU variants: Bosch EDC17C08, Bosch EDC17C53, Bosch EDC17CP14. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Kia Ceed remain valid after Stage 1?
After remapping the Kia Ceed, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Kia Ceed?
Reading and writing via OBD takes 25-30 minutes on the Kia Ceed. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Kia Ceed?
Before Stage 1 the original of the Kia Ceed 1.6 CRDI EU5 126 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Kia Ceed 1.6 CRDI EU5 126 hp cost?
The remap price for the Kia Ceed 1.6 CRDI EU5 126 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.