Kia Carnival-Sedona 2.2 CRDI EU6 200 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Kia Carnival-Sedona 2.2 CRDI EU6 200 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Carnival-Sedona 2.2 CRDI EU6 200 hp ECU
Kia Carnival-Sedona (2014) 2.2 CRDI EU6 200 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 200 to 220 hp (+20 hp, +10%) and torque from 441 to 521 Nm (+80 Nm). ECU — Bosch EDC17C57. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2014 — the Tricore ECU era; OBD flash works on most production revisions.
Kia shares platforms and engines with Hyundai and Genesis. Kia is a Korean carmaker, part of the Hyundai Motor Group. Kia is positioned alongside Hyundai, with an emphasis on styling and a sporty character. Mid-generation diesel models use standard OBD read/write.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. High-output Hyundais are the N-series and Santa Fe, with solid headroom for Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Kia Carnival-Sedona 2.2 CRDI EU6 200 hp?
Stage 1 chip tuning on the Kia Carnival-Sedona 2.2 CRDI EU6 200 hp boosts engine output by 20 hp: from 200 to 220 hp. Torque rises from 441 to 521 Nm (+80 Nm).
What changes in the Kia Carnival-Sedona ECU after Stage 1?
Stage 1 on the Kia Carnival-Sedona 2.2 CRDI EU6 200 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
What does Stage 1 give on the powerful Kia Carnival-Sedona 2.2 CRDI EU6 200 hp?
Stage 1 on the powerful Kia Carnival-Sedona 2.2 CRDI EU6 200 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Kia Carnival-Sedona 2.2 CRDI EU6 200 hp?
Stage 2 for the Kia Carnival-Sedona 2.2 CRDI EU6 200 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Kia Carnival-Sedona 2.2 CRDI EU6 200 hp run?
The control unit of the Kia Carnival-Sedona 2.2 CRDI EU6 200 hp is the Bosch EDC17C57. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Kia Carnival-Sedona?
Stage 1 on the Kia Carnival-Sedona voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Kia Carnival-Sedona 2.2 CRDI EU6 200 hp done?
The full remap cycle for the Kia Carnival-Sedona — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Kia Carnival-Sedona?
The original Kia Carnival-Sedona ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Kia Carnival-Sedona 2.2 CRDI EU6 200 hp?
The cost of Stage 1 for the Kia Carnival-Sedona 2.2 CRDI EU6 200 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.